ODB LCT60C Owner's Manual
  1. Manuals
  2. Brands
  3. ODB Manuals
  4. Blower
  5. LCT60C
  6. Owner's manual

ODB LCT60C Owner's Manual

Direct driven leaf collector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LCT60C
LCT60C
Direct Driven Leaf Collector
Direct Driven Leaf Collector
Owner's Manual
Safety Manual
Pre-Operating Manual
Operating Manual
Maintenance Manual
Service Manual
Parts Catalog
June 2014 edition
ODB Company
5118 Glen Alden Drive
Richmond, VA 23231
800-446-9823
LCT60C
www.leafcollector.com
418111

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LCT60C and is the answer not in the manual?

Questions and answers

Related Manuals for ODB LCT60C

Summary of Contents for ODB LCT60C

  • Page 1 LCT60C LCT60C Direct Driven Leaf Collector Direct Driven Leaf Collector Owner's Manual Safety Manual Pre-Operating Manual Operating Manual Maintenance Manual Service Manual Parts Catalog June 2014 edition ODB Company 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823 LCT60C www.leafcollector.com 418111...
  • Page 2 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!
  • Page 3 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.
  • Page 4 THANK YOU Thank you and Congratulations on your puchase of your ODB Leaf Collector. Your ODB leaf col- lector has been carefully designed and manufactured to give you a maximum amount of dependabil- ity and years of trouble-free operation. Take comfort in the fact the ODB has been manufacturing municipal products since 1910 and takes pride in our product's quality and our customer service.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Read and understand this entire manual before operating, maintaining or repair- ing the leaf vacuum. Table of Contents Contents LCT60C Table of Contents 1.0 GENERAL SAFETY 1.1 Safety Symbol Definitions ........................10 1.2 Do’s and Do Not’s:..........................11 1.3 Training: ..............................13...

  • Page 6: Table Of Contents

    7.7 Kraft Fluid Drive Breakdown (Optional) ....................92 7.8 Kraft Fluid Drive Common Parts (Optional) ....................93 8.0 BLOWER HOUSING GROUP 8-0 ..................................94 8.1 Blower Housing Group ..........................95 8.2 Blower Housing Face Group ........................96 8.3 Exhaust Duct Assembly ..........................97 ODB COMPANY 800-446-9823 LCT60C...
  • Page 7 9.4 Axle Hub Assembly ............................ 103 9.5 Brake Assembly ............................104 10.0 HOSE BOOM GROUP 10-0 ................................... 105 10.1 Boom Group.............................. 106 10.2 Intake Hose Group ............................ 107 10.3 M3219 Hydraulic Boom Pump ......................... 108 INDEX Index ................................. 110 ODB COMPANY 800-446-9823 LCT60C...
  • Page 8 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.

  • Page 9: Contents

    Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. Safety Section 1.0 GENERAL SAFETY Contents LCT60C Table of Contents 1.0 GENERAL SAFETY 1.1 Safety Symbol Definitions ................... 10 1.2 Do’s and Do Not’s:......................11 1.3 Training: ........................13 1.4 Safety Decals ......................

  • Page 10: Safety Symbol Definitions

    Disregarding this safety warning WILL result in serious equipment damage, injury or possible death. Disregarding this safety warning CAN result in serious equipment damage, injury or possible death. Disregarding this safety warning MAY result in minor or moderate injury or property damage. ODB COMPANY 800-446-9823 LCT60C...

  • Page 11: Do's And Do Not's

    18. DO NOT operate unit if fuel is spilled or with fuel cap off. 19. DO NOT smoke or weld near the unit. 20. DO NOT run engine in an enclosed area. 21. DO NOT place hands or feet near moving or rotating parts. ODB COMPANY 800-446-9823 LCT60C...
  • Page 12 8. DO wear proper safety equipment as described in this manual. 9. DO watch for pedestrians, animals and other foreign material when vacu- uming leaves. 10. DO replace any worn or missing safety stickers immediately. ODB COMPANY 800-446-9823 LCT60C...

  • Page 13: Training

    SAFETY PRECAUTIONS 1.3 Training: Improper use of the ODB leaf collector CAN result in severe per- sonal injury or death. All personnel using this leaf vacuum must be trained and qualified with all the operations, maintenance, repair and safety procedures defined in this manual.

  • Page 14: Safety Decals

    SAFETY PRECAUTIONS 1.4 Safety Decals ODB COMPANY 800-446-9823 LCT60C...

  • Page 15: Safety Decals

    Warning - Do Not Open Cover While ... 65.1801 Warning - Do Not Operate Unit without ... 200184 Warning - Driver Check Lug Nuts ... 200180 Danger - Check Tongue ... 200184 Warning - Drive Check Lug Nuts ... ODB COMPANY 800-446-9823 LCT60C...
  • Page 16 SAFETY PRECAUTIONS 1.4 Safety Decals - Decal Layout for LCT60C/600/650/6000 ODB COMPANY 800-446-9823 LCT60C...

  • Page 17: Vin And Serial Number Locations

    Gross Axle Weight Rating which is the maximum al- lowable weight the axles are designed to carry. The tire inflation pressure is also on the sticker. Serial Number Tag VIN Number Tag Tire and Load Information ODB COMPANY 800-446-9823 LCT60C...

  • Page 18: Pre-Operating Section

    2.0 PRE-OPERATING SECTION 2.0 PRE-OPERATING SECTION 2.1 Instrument and Controls: ....................19 2.2 Safe Operations: .......................21 2.3 Preparation For Operation ....................23 2.4 Pre-Transport Checks .......................24 2.5 Personal Protective Equipment and Clothing ..............26 2.6 Work Site Preparation ......................27 ODB COMPANY 800-446-9823 LCT60C...

  • Page 19: Instrument And Controls

    Indicates the engine coolant temperature. If the gauge reads over 240 degrees the unit should be checked by a qualified technician. Hour Meter: Indicates the accumulated hours of the the engine. This should be used to schedule maintenance. ODB COMPANY 800-446-9823 LCT60C...
  • Page 20 PTO while pressing the bottom of the switch disen- gages the PTO. Engine Heat Switch (Cummins engines only): Press the top of the switch for 20 – 30 seconds initiates the glow plug to aid in starting a cold engine. ODB COMPANY 800-446-9823 LCT60C...

  • Page 21: Safe Operations

    3. A record of mental stability with no history of epileptic seizures, dizziness, or any other disability that may result in injury to himself or others. If any of these requirements are not satisfied at any time, the person failing to meet these requirements MUST NOT OPERATE THIS EQUIPMENT. ODB COMPANY 800-446-9823 LCT60C...
  • Page 22 7. Operators must not be under the direct or indirect influence of alcohol and/or drugs. This includes prescription drugs that could cause drowsi- ness, dizziness, or any other condition that would impair their ability to operate or use this equipment in a safe manner. ODB COMPANY 800-446-9823 LCT60C...

  • Page 23: Preparation For Operation

    9. Check all guards to ensure they are undamaged, in place and properly secured. 10. All decals must be in place and legible prior to operating the leaf vacuum. See the decal section for decal replacement. ODB COMPANY 800-446-9823 LCT60C...

  • Page 24: Pre-Transport Checks

    Allow enough slack to ensure that vehicle turns will not activate the safety breakaway switch. NOTE: Fol- low manufacturers procedure to ensure tow vehicles brake control box is properly adjusted. ODB COMPANY 800-446-9823 LCT60C...
  • Page 25 10. Verify there are no loose tools or materials on the trailer, inside the intake and exhaust hoses, or inside the engine sheet metal. 11. Check all cones, wheel-chocks, signs or other support tools and mate- rials to ensure proper stowage. ODB COMPANY 800-446-9823 LCT60C...

  • Page 26: Personal Protective Equipment And Clothing

    Work clothes MUST be close fitting, but not restrictive of move- ment, without any loose parts that could be entangled in any parts of the leaf vacuum. This includes items such as jewelry, chains and backpacks. ODB COMPANY 800-446-9823 LCT60C...

  • Page 27: Work Site Preparation

    DO NOT allow pedestrians, children or animals near the work area. 7. Make sure that the exhaust hose (if equipped) fits properly into the box container so that all debris is blown into the box container. ODB COMPANY 800-446-9823 LCT60C...

  • Page 28: Operating Section

    3.0 OPERATING SECTION Operating Section 3.0 OPERATING SECTION 3.1 Starting Engine ........................29 3.2 Engaging the PTO ........................31 3.3 Fluid Drive Coupler (if equipped) ..................33 3.4 Vacuuming Leaves ......................... 34 ODB COMPANY 800-446-9823 LCT60C...

  • Page 29: Starting Engine

    3b 2. Make sure the PTO is disengaged as shown in figure 3b. 3. Turn the throttle control (fig. 3a) counter-clockwise 2 revolutions. 4. Depress and hold the Murphy switch while starting. PTO shown disengaged ODB COMPANY 800-446-9823 LCT60C...
  • Page 30 -2 minutes. Extend this period 2 - 4 minutes when operating at temperatures below freezing. 11. Watch the coolant temperature gauge. Do not place engine under load until it is properly warmed up. The normal engine coolant temperature range is 180 - 202 degrees F. ODB COMPANY 800-446-9823 LCT60C...

  • Page 31: Engaging The Pto

    PTO at a specific speed in order to properly en- gage the PTO. Because of this the PTO handle only needs to be raised slightly, then the assist cylinder will take over and engage the PTO automatically. (fig. 3c) ODB COMPANY 800-446-9823 LCT60C...
  • Page 32 Disengaging the PTO (refer to figures 3b and 3d): 1. Decrease the rpm to 1000 rpm. 2. Grasp the PTO handle and slowly disengage the PTO. PTO shown disengaged 3. When the PTO is fully disengaged, the engine can be PTO handle shut down. ODB COMPANY 800-446-9823 LCT60C...

  • Page 33: Fluid Drive Coupler (If Equipped)

    IMPORTANT: If the unit experiences any heavy vibrations or makes any unusual noises, shut the engine down and after following the necessary safety guidelines, have a qualified technician investigate the cause. DO NOT operate a unit that is in a state of disrepair. ODB COMPANY 800-446-9823 LCT60C...

  • Page 34: Vacuuming Leaves

    6. NOTE: Wet leaves will need higher rpm’s to vacuum whereas dry leaves will only need minimal rpm’s. 7. Continue moving the nozzle in a sweeping motion above the leaves while vacuuming. ODB COMPANY 800-446-9823 LCT60C...

  • Page 35: Maintenance Section

    Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. 4.0 MAINTENANCE SECTION 4.0 MAINTENANCE SECTION 4.1 Maintence Overview: ....................36 4.2 Maintenance and Lubrication ..................37 4.3 Lubrication: ........................38 4.4 Preventative Maintenance .....................41 4.5 Torque Values .......................45 Maitenance Section ODB COMPANY 800-446-9823 LCT60C...

  • Page 36: Maintence Overview

    4.1 Maintence Overview: Only properly trained personnel should perform maintenance or re- pair on this equipment. Consult ODB before performing any main- tenance procedures that is not specificially covered in this manual. Improper maintenance or repair may void any and all warranties on this equipment.

  • Page 37: Maintenance And Lubrication

    Inspect All Ducts for Damage Remove Blower Face and Inspect Liners for Wear Check PTO / Clutch Adjustment Grease / Inspect Wheeel Bearings for Corrosion or Wear Inspect all Hydraulic and Fuel Lines for Leaks or Wear ODB COMPANY 800-446-9823 LCT60C...

  • Page 38: Lubrication

    Any special or custom built units may have other lubrication procedures not directly mentioned in this manual. Please consult ODB before any lubricat- ing procedures not specifically mentioned in this manual. Proper lubrication of your unit correlates directly to how long your unit will last.
  • Page 39 4.3 Lubrcation, continued; Lubrication Points, continued; Trailer Wheel Bearings (figure 4.3b): Most of ODB's units are equipped with "EZ-Lube" grease fittings. This allows the operator to grease the bearings without removing the hubs. The "EZ- Lube" feature consists of axle spindles that have Figure 4.3b...
  • Page 40 4.3 Lubrication, continued; Figure 4.3d Lubrication Points, continued; Boom Swivel Bearings (figure 4.3d): These bearings are on most of ODB's model LCT600 and LCT6000 after 1996. Grease the boom bearings once every week with a multi-purpose moisture resistant #2 grease.

  • Page 41: Preventative Maintenance

    NEVER check the engine coolant when the engine is hot. Allow the engine to cool at least one hour before checking the coolant. Check the engine owner's manual for instructions. ALWAYS wear eye and hand protection when working with the radiator. ODB COMPANY 800-446-9823 LCT60C...
  • Page 42 Check the side wall of the tire for proper inflation pressure. Torque all 1/2" diameter lug nuts from 90 to 120 foot pounds. Torque all 5/8" diameter lug nuts from 175 to 225 foot pounds. Consult the axle manufacturers owner's manual for more detailed information. ODB COMPANY 800-446-9823 LCT60C...
  • Page 43 A full fuel tank will reduce the possibility of condensation forming in the tank and moisture entering the fuel lines. Check the fuel lines daily for cracks, holes or tightness. ODB COMPANY 800-446-9823 LCT60C...
  • Page 44 (ATF) is recommended. Clean debris and oil off the solenoid and pump daily. A build up of debris can cause pre- mature failure to the pump. Check and tighten all hydraulic fittings making sure there are no leaks. ODB COMPANY 800-446-9823 LCT60C...

  • Page 45: Torque Values

    Tighten plastic insert or crimped steel-type lock nuts to approximately 50 percent of the dry torque shown inthe chart, applied to the nut, not the bolt head. ODB COMPANY 800-446-9823 LCT60C...
  • Page 46 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!
  • Page 47 5.0 SERVICE SECTION Service and Troubleshooting Wiring Diagrams ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...
  • Page 48 5.4 Impeller Installation and Removal ..............52 5.4 Impeller Installation and Removal, continued ..........53 5.7 Replacing the Blower Housing Liners ............54 5.7 Replacing the Blower Housing Liners; continued, ........55 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 49: Service Section

    If the engine continues to run then the water temperature switch is defective. Replace the switch. If the engine shuts off, do the same test on the oil pressure switch. If the engine continues to shut off after this test call ODB for additional service procedures. ODB COMPANY...

  • Page 50: Auto Mfg. Clutch Adjustment - 2008 And After

    With the clutch in the engaged position (the PTO is engaged when the PTO handle is pointing straight up on the LCT600 and LCT6000 and pointing out to the side (3 o'clock) on the LCT60C, LCT650 and SCL800TM) adjust the nut (See PIC# 2) against the "rocker ball" until a 1/8" gap between the nut and rocker ball is visible ( See PIC# 3).

  • Page 51: Hydraulic Boom Troubleshooting Guide

    3. If there is current, the valve is bad and need to be replaced. Valve part number is MP-19283.D. If there is NO current, check the wiring between the switch and valve, especially any connections. If the wiring checks out okay, the switch is bad and needs to be replaced. ODB COMPANY 800-446-9823 LCT60C...

  • Page 52: Impeller Installation And Removal

    8. At this point it would be a good idea to inspect the blower housing liners and blower housing for any damage or wear. Any damage or wear to the liners should be fixed by replacing the liners immediately. ODB COMPANY 800-446-9823 LCT60C...

  • Page 53: Impeller Installation And Removal, Continued

    8. If the bushing has a set screw on it, tighten the screw snug with an allen wrench (Fig. 3). This will help keep the key in place. 9. Install the shaft protector on to the shaft (Fig. 4 or 5). Direct Drive Fig. 5 Belt Drive ODB COMPANY 800-446-9823 LCT60C...

  • Page 54: Replacing The Blower Housing Liners

    Tack weld the liner in place every 8 to 10 inches Stop Weld Piece to help keep the liner in place. Weld ODB COMPANY 800-446-9823 LCT60C...

  • Page 55: Replacing The Blower Housing Liners; Continued

    Tack weld the long liner to the overlap piece and figure 5.5b tack weld around the liner as you did on the short liner. Install the two bolt-in liners just as they were removed. Weld Overlap Piece Stop Weld Piece Weld ODB COMPANY 800-446-9823 LCT60C...

  • Page 56: Wiring Diagrams

    5.10.8 Trailer Plug Wiring Diagram ..................65 5.10.9 Engine Wiring Harness Descriptions .................66 5.10.10 Brake Wiring Harness .....................67 5.10.11 Boom Wiring Diagram .....................68 5.10.12 Remote Throttle / Clutch Wiring Harness ...............69 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 57: Engine Wiring Diagram

    Service Section 5.10.1 Engine Wiring Diagram ODB COMPANY 800-446-9823 LCT60C...

  • Page 58: Engine Main Harness - Enlarged

    Service Section 5.10.2 Engine Main Harness - Enlarged Engine Main Harness ODB COMPANY 800-446-9823 LCT60C...

  • Page 59: Auxillary Engine Harness - Enlarged

    Aux Engine Harness Note: Not all wires will be installed in the small harnesses. If the unit wasn’t ordered with the factory installed option then the wiring to that option may not be included in the harness ODB COMPANY 800-446-9823 LCT60C...

  • Page 60: Engine Wiring Harness Descriptions

    Strobe Light "-"; came from ground to solenoid Purple w/ Yellow Stripe Strobe Switch Aux "+"; came from Aux Engine Harness pin #13 Black Strobe Switch Aux "-"; came from ground on Solenoid Continued ... --> ODB COMPANY 800-446-9823 LCT60C...

  • Page 61: Engine Wiring Harness Descriptions, Continued

    "+" from ignition; came form Aux Engine Harness pin# 2 Black "-" from ignition; came from ground on solenoid [empty] Orange w/ Yellow Stripe Rocker Switch; came from Aux Engine Harness pin# 5 Yellow w/ Orange Stripe Rocker Switch; came from Aux Engine Harness ODB COMPANY 800-446-9823 LCT60C...

  • Page 62: Engine Rocker Switch Wiring Diagrams

    Throttle Slow / Clutch Disengage Black “-” from Circuit Board Black Looped from #9 Yellow Looped from #10 Black Looped from #5 Yellow Looped from $2 This plug is used for the Remote Throttle and the Remote Clutch Rocker Switches. ODB COMPANY 800-446-9823 LCT60C...

  • Page 63: Main Circuit Board

    Rem. Clutch 10 amp Circ. Brk diode Temp Aux Wire Rem. Throttle 10 amp Circ. Brk diode Trp Door diode Strobe Light Main Wire 10 amp Circ. Brk E Stop diode (+) (-) (+) (+) Battery unfused ODB COMPANY 800-446-9823 LCT60C...

  • Page 64: Main Circuit Board Plug Diagrams

    Yellow / Blue stripe-Throttle Fast 10 Empty 11 Blue / Yellow stripe-Throttle Slow 12 Yellow / Blue stripe-Strobe + 13 Purple / Yellow stripe-Strobe Sw+ 14 Yellow - Aux Harness 15 Black - battery 16 Yellow - Aux Harness ODB COMPANY 800-446-9823 LCT60C...

  • Page 65: Trailer Plug Wiring Diagram

    Service Section 5.10.8 Trailer Plug Wiring Diagram ODB COMPANY 800-446-9823 LCT60C...

  • Page 66: Engine Wiring Harness Descriptions

    Service Section 5.10.9 Trailer Wiring Harness Descriptions ODB COMPANY 800-446-9823 LCT60C...

  • Page 67: Brake Wiring Harness

    Service Section 5.10.10 Brake Wiring Harness ODB COMPANY 800-446-9823 LCT60C...

  • Page 68: Boom Wiring Diagram

    Red (4 gauge cable) Positive to Battery Black (4 gauge cable) Ground from Solenoid to Hydraulic Motor Black (from up down switch) changes to Yellow - Positive for Boom Rocker Switch on instrument panel (if equipped) ODB COMPANY 800-446-9823 LCT60C...

  • Page 69: Remote Throttle / Clutch Wiring Harness

    Service Section 5.10.12 Remote Throttle / Clutch Wiring Harness ODB COMPANY 800-446-9823 LCT60C...
  • Page 70 PARTS BREAKDOWNS SECTION Engine Group Clutch Group Blower Housing Group Trailer Group Hose Boom Group ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 71: Engine Group 6-0

    6.10 Engine Miscelleous Parts Group ..............81 6.11 Remote Clutch / Throttle Circuit Board Assembly ......... 82 6.12 Remote Clutch and Remote Throttle Assembly ..........83 6.13 Chaffe Eliminator Assembly, hinged .............. 84 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 72: Instrument Panel Group

    Circuit Breaker, 10 amp STD.2004 Switch Harness, Rem PTO 30410.30 Circuit Breaker, 30 amp STD.2002 Switch Harness, Eng Heat VF4-15F11 Relay STD.1502B LED Light Assembly MO-P81505 Murphy Switch LCT623.001A Throttle Cable 31.253 Ignition Switch 63524 Tachometer / Hour Meter ODB COMPANY 800-446-9823 LCT60C...

  • Page 73: Air Cleaner Group

    ... Clamp ... P102980 ... Rubber Baffle ... P103113 ... Dust Cap ... P101870 ... Wing Nut STD.2704 Rubber Elbow P004307 Mounting Bands (to sheet metal) H001249 Pre-Cleaner ... P020648 ... Bowl Cover ... P020227 ... Bowl ODB COMPANY 800-446-9823 LCT60C...

  • Page 74: Strobe Light Parts Group

    6.3 Strobe Light Parts Group ITEM # PART NUMBER DESCRIPTION STD.2213 LED Strobe Light 60700 Grommett 4045.0021B1 Rocker Switch 4045.0024B Switch Wiring Harness STD.2214 Wiring Harness, rocker switch to light. ODB COMPANY 800-446-9823 LCT60C...

  • Page 75: Sheet Metal Group

    Oil Fill Access Door LCT609.602 Overcenter Latch 4045.2101 Front Panel 4045.2112F Cover, Solenoid 4045.0018 Radiator Screen STD.6304 Wiring Plug Bracket LCT650.114 Radiator Screen Clamp 2856.26012 Door Grommet 4045.2109 Panel Door, LH 4045.2106A Upper Side Panel, LH ODB COMPANY 800-446-9823 LCT60C...

  • Page 76: Engine Mount Group

    6.5 Engine Mount Group John Deere 4045D, 4045T ITEM # PART NUMBER DESCRIPTION 4045.2151A Engine Mount, Front 4045.2152 Engine Mount, Rear 4045.2154 Side Rail, LH, except LCT650 Return Spring Bracket 4045.2153 Side Rail, RH 4045.2155 Wire Harness Bracket ODB COMPANY 800-446-9823 LCT60C...

  • Page 77: Muffler (Exhaust) Assembly

    6.6 Muffler (Exhaust) Assembly LCT's only with John Deere engines (not SCL's) May 2004 and after ITEM # PART NUMBER DESCRIPTION 650.2701 Muffler STD.2702 Clamp, muffler ODB COMPANY 800-446-9823 LCT60C...

  • Page 78: Radiator Assembly Group

    4045.9681 Lower Radiator Hose 4045.2190A Rear Fan Shroud 4045.2151E Radiator Shim AT35158.A Radiator Fan H9601 Radiator Grommet R128443 Fan Spacer 4045.2151F Radiator Bolt Bracket G8M8X090 Spacer Bolts, 4 required ZSB.500.750 Shoulder Bolt 81331 Upper Radiator Hose ODB COMPANY 800-446-9823 LCT60C...

  • Page 79: Engine Senders / Switch Group

    Left ITEM # PART NUMBER DESCRIPTION 35423.049 Water Temperature Switch C5104.4.2 Fitting for Water Temperature Switch 9603273 Oil Pressure Switch 1500171 Oil Pressure Sender 3750.2* Bushing for Oil Pressure Switch and Sender 52320.009 Water Temperature Sender ODB COMPANY 800-446-9823 LCT60C...

  • Page 80: Battery Group

    Battery Hold Down Bar BTS1 Battery Tray, all but SCL's SCL.42B Positive Battery Cable, Battery to Solenoid - LCT60C/650- 42" long LCT600.84B Positive Battery Cable, Battery to Solenoid - LCT600/6000 - 84" long LCT60.15B Negative Battery Cable, all - 15" long BTC.R...

  • Page 81: Engine Miscelleous Parts Group

    6.10 Engine Miscelleous Parts Group John Deere Engines ITEM # PART NUMBER DESCRIPTION 39011.2 Throttle Connector 4045.9101 Throttle Cable Bracket, LCT 4045T.9101A Throttle Cable Clamp 400016 Fuel Line Bracket 2856.26012 Grommet - Door ST40 Starter Solenoid ODB COMPANY 800-446-9823 LCT60C...

  • Page 82: Remote Clutch / Throttle Circuit Board Assembly

    Backing Plate only available as an assembly Spacer, rquires 4 only available as an assembly Circuit Board only available as an assembly Actuator Wiring Harness only available as an assembly Instrument Panel and Nozzle Wiring Harness ODB COMPANY 800-446-9823 LCT60C...

  • Page 83: Remote Clutch And Remote Throttle Assembly

    Cable Adaptor - clutch 800.434 Limit Switch (3x only) STD.6553 Throttle Cable - direct drive STD.6571 Cover STD.6553B Throttle Cable - belt drive STD.6570 Limit Switch Bracket STD.6557 Throttle Acutator (bottom) STD.2916 CPC Housing STD.6558 Cable Adaptor-throttle ODB COMPANY 800-446-9823 LCT60C...

  • Page 84: Chaffe Eliminator Assembly, Hinged

    May 2002 must order RAS.113 Shaft Bracket RAS.102A LCT609.602 Over center Latch, all but RAS.105 Shaft LCT650 RAS.106 Mesh Screen LCT650.114 Destaco Latch, not shown, LCT650 only RAS.107 Screen Holder RAS.114 Angle Frame, LCT650 only RAS.108 Flange Bearing ODB COMPANY 800-446-9823 LCT60C...

  • Page 85: Clutch Group 7-0

    7.4 Clutch Assist Group ....................89 7.5 Kraft Fluid Drive Group (Optional) ..............90 7.6 Kraft Fluid Drive Installation (Optional) ..............91 7.7 Kraft Fluid Drive Breakdown (Optional) .............92 7.8 Kraft Fluid Drive Common Parts (Optional) ............93 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 86: Autohd Pto Clutch Group

    Decal, Diesel Clutch Note: *48080050 and 48080050.8OF includes the everything on this page, the AutoHD PTO page and the AutoHD linkage page. This is the complete PTO/Clutch assembly. It does not include the clutch assist assembly. ODB COMPANY 800-446-9823 LCT60C...

  • Page 87: Autohd Pto Assembly Group

    Key, belt drive units only OD-41500203 PTO shaft OD-45000105 Bolt, 9/16-12 x 1- 3/4" OD-45000177 Bolt, 9/16-12 x 3" OD-45000103 Lock Washer, 9/16" OD-41500204 PTO Housing OD-41500242 PTO Collar, 03/08 - present OD-41500207 PTO Bearing, Front ODB COMPANY 800-446-9823 LCT60C...

  • Page 88: Autohd Pto Linkage Group

    Bolt, 1/4 - 28 x 2" 41500019 Linkage Rod End 45000015 Locknut, 1/4 - 28 see below Shaft, Lever 45000044 Handle 45000175 Boot 41500102 Shaft Housing, AutoHD 41500164 Alignment Tool 41500043 Grease Zerk 41500103 Alignment Tool ODB COMPANY 800-446-9823 LCT60C...

  • Page 89: Clutch Assist Group

    DESCRIPTION 400050.A Clutch Cylinder 400054.C Cylinder Support Bracket, JD 41500095 Clutch Bracket Arm, Auto HD 41500019 Linkage, Rod end 41500019A Linkage, Threaded insert 400050.C1 Bearing 41500102 Pivot Shaft Tube, Auto HD 41500041A.HD Pivot Shaft, 400050.C2 Spacer ODB COMPANY 800-446-9823 LCT60C...

  • Page 90: Kraft Fluid Drive Group (Optional)

    7.5 Kraft Fluid Drive Group (Optional) Fluid Drive Coupler (Optional) ODB COMPANY 800-446-9823 LCT60C...

  • Page 91: Kraft Fluid Drive Installation (Optional)

    7.6 Kraft Fluid Drive Installation (Optional) Fluid Drive Coupler (Optional) ODB COMPANY 800-446-9823 LCT60C...

  • Page 92: Kraft Fluid Drive Breakdown (Optional)

    7.7 Kraft Fluid Drive Breakdown (Optional) Fluid Drive Coupler (Optional) ODB COMPANY 800-446-9823 LCT60C...

  • Page 93: Kraft Fluid Drive Common Parts (Optional)

    7.8 Kraft Fluid Drive Common Parts (Optional) Fluid Drive Coupler (Optional) ITEM # PART NUMBER DESCRIPTION UU-TFP7018CC 390 Degree Fuse Plug, 5/8" UU-TFP2292 Seal Kit UU-8202AD Roller Bearing UU-TFP103602X Shaft UU-8002DX Bearing, small UU-8002AS Ball Bearing UU-KPC2.01.5 Fluid, 1-1/2 gallon ODB COMPANY 800-446-9823 LCT60C...

  • Page 94: Blower Housing Group 8-0

    8.0 BLOWER HOUSING GROUP 8.0 BLOWER HOUSING GROUP 8-0 ........................94 8.1 Blower Housing Group ................95 8.2 Blower Housing Face Group ..............96 8.3 Exhaust Duct Assembly ................97 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 95: Blower Housing Group

    Blower Housing Back LCT650.601 Impeller Bushing LCT620.602 Liner Set LCT650.601F Bushing Key LCT600.603 Bearing Plate LCT600.615 Shaft Protector LCT620.602A Bolt-In Liner 5CZ.500.750 Shaft Bolt LCT620.603 Bolt LCT620.604 Straight Liner LCT620.603 Bolt LCT620.603N Nut LCT620.603N Nut LCT60.33 Impeller ODB COMPANY 800-446-9823 LCT60C...

  • Page 96: Blower Housing Face Group

    Tail Light Cover Plate 6410.51 Limit Switch Limit switch power cord SCL800.628 Hose Guard LCT600.635.1 Retaining Rod LCT650.624 Intake Elbow LCT650.102C Strobe Light Box STD.4001 Limit Switch Actuator STD.4000.A Limit Switch Box Assembly STD.4000 Limit Switch Box ODB COMPANY 800-446-9823 LCT60C...

  • Page 97: Exhaust Duct Assembly

    Exhaust Duct Support LCT616.616 Hose Clamp - Bolt style LC-MDH.16.48 Exhaust Hose, 16"D x 48"L LCT60.629 Exhaust Hose Support 2875 Grommett, Leaf Rake Rack LCT60.704.30 Duct Extension, 16" D x 18" Long LCT60.629CL Exhaust Hose Support Clamp ODB COMPANY 800-446-9823 LCT60C...

  • Page 98: Trailer Group

    9.2 Fuel Tank Group ....................100 9.3 Tongue Group ...................... 101 9.4 Hydraulic Parking Jack - OPTIONAL ..............102 9.4 Axle Hub Assembly ..................... 103 9.5 Brake Assembly ....................104 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 99: Trailer Bed Group

    LCT622.602 Battery Box Door 16 600.2437 Lic. Plate Mount Brkt LCT622.602.L Door Latch 17 LCT600.010 License Plate Bracket STD.2414 LED Tail Light Assembly 18 LCT60.615B License Plate Light includes #9,16,17 19 STD.2202 LED Marker Lght, Yellow ODB COMPANY 800-446-9823 LCT60C...

  • Page 100: Fuel Tank Group

    600.2525 Fuel Sender MET633.901 Fuel Fitting (not for pickup) MET633.901M Fuel Fitting Grommett 600.2527 Fuel Fitting, pickup tube and screen 600.2523 Side Support Bracket 600.2522 Center Support Bracket 400016 Fuel Line Bracket (mounts on engine rail) ODB COMPANY 800-446-9823 LCT60C...

  • Page 101: Tongue Group

    9.3 Tongue Group LCT60C, LCT600, LCT650 and LCT6000 4 4 4 ITEM # PART NO. DESCRIPTION ITEM # PART NO. DESCRIPTION LCT622.623D Pintle Eye Assembly LCT622.633 Tow Bar, LCT60C/650 LCT622.634 Tow Bar, LCT600 consists of LCT622.636 Tow Bar, LCT6000 LCT622.623 Pintle Eye Ring LCT622.624...

  • Page 102: Hydraulic Parking Jack - Optional

    9.4 Hydraulic Parking Jack - OPTIONAL LCT60C/ 600 / 6000 / 650 - optional - Nov. 2006 and after ITEM# PART NO. DESCRIPTION ITEM# PART NO. DESCRIPTION LCT622.624H1 Hyd. Parking Jack Assembly 5CZ.500.1.5 Clamp Bolts incl. all below except#1-10 80.1550 Hydraulic Pump 80.1552...

  • Page 103: Axle Hub Assembly

    9.4 Axle Hub Assembly LCT60C/600/650/6000 ITEM # PART NUMBER DESCRIPTION 010-036-00 Grease Seal 031-030-02 Inner Bearing Cone 031-030-01 Inner Bearing Cup 031-017-01 Outer Bearing Cup 031-017-02 Outer Cone 006-176-00 Spindle Nut 019-002-00 Cotter Pin 021-039-00 021-035-00 046-032-22 Rubber Plug 005-023-00 Spindle Washer 006.080.00...

  • Page 104: Brake Assembly

    9.5 Brake Assembly LCT60C/600/650/6000 ITEM # PART NUMBER DESCRIPTION K23-180-00 LH Complete Brake Assembly K23-181-00 RH Complete Brake Asembly 036-089-10 Backing Plate Assembly 047-107-05 Actuator Lever Arm Assembly, LH 047-108-05 Actuator Lever Arm Assembly, RH 027.005.00 Wire Clip 046.009.00 Retractor Spring...

  • Page 105: Hose Boom Group 10-0

    10.0 HOSE BOOM GROUP 10.0 HOSE BOOM GROUP 10-0 ......................... 105 10.1 Boom Group....................106 10.2 Intake Hose Group ..................107 10.3 M3219 Hydraulic Boom Pump ............... 108 INDEX Index ........................110 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 106: Boom Group

    90 Degree Fitting LCT616.615D Hold Down 9205.4.4 Straight Fitting STD.2320B Push Button Box MP-CS.150.12 Boom Cylinder 4045.0021A Rocker Switch(optional) LCT60.642 Chain LCT617.608 Hydraulic Hose LCT650.620.2B Boom Arm 60C.2322 Power Cord 650.2316 Latch Hook 650.2317 Latch Lever ODB COMPANY 800-446-9823 LCT60C...

  • Page 107: Intake Hose Group

    LC-MDH.16.120 Intake Hose, except SCL LC-SDH.16.120.UC Intake Hose, Urethane (multi-axis) LC-MDH.16.100 Intake Hose, SCL800 LCT616.601 Intake Nozzle LCT616.616 Hose Clamp, Bolt Style LCT616.603U Hose Clamp, 3/8" thick hoses LCT616.603U.B Hose Clamp, urethane hoses LCT60.642 Support Chain ODB COMPANY 800-446-9823 LCT60C...

  • Page 108: M3219 Hydraulic Boom Pump

    PART NUMBER DESCRIPTION MP-M3219.S Complete Pump Assembly (all above) MP-08004 Electric Motor, 12V MP-17744 Solenoid Switch, heavy duty MP-19283.D Coil, Cartridge Assembly MP-07193.D Cartridge MP-10861.D Coil, 2 way - 2 position MP-06232 Plastic Reservoir, 3.5" x 15.7" ODB COMPANY 800-446-9823 LCT60C...
  • Page 109 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.

  • Page 110: Index Index

    Fuel Sender 99 Chain, Safety 100 Fuel Tank 99 Motor, Boom Pump 107 Circuit Board Mounting Bands 74 Circuit Breaker Muffler 78 Grease Cap 102 Clamp, Hose 106 Murphy Switch 73 Grease Seal 102 Clip Spring 90 ODB COMPANY 800-446-9823 LCT60C...
  • Page 111 Radiator 79 Strobe Module 75 Bracket 79 Support Chain 106 Fan 79 Switch Grommet 79 Murphy Shim 79 Oil Pressure 80 Shroud 79 Water Temperature 80 Radiator Cap 79 Switch Harness, Cold Start Radiator Hose 79 ODB COMPANY 800-446-9823 LCT60C...
  • Page 112 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!

This manual is also suitable for:

Lct600

Table of Contents