Instrument And Controls - ODB LCT6000 Owner's Manual

Always make sure the PTO is disen-
gaged before starting unit.
ODB COMPANY
Pre-Operating Section

2.1 Instrument and Controls:

Ignition Switch:
Used to power the accessories and start the unit.
ACCESSORIES - first position
STARTER ENGAGE - second position (springs return
to first position)
Strobe Toggle
This switch toggles the strobe light on the Blower
Housing (6.3 & 8.2)
CONTROL MODULE
To enter Menu system
Hold Menu button and press Enter◄ button
Menu Navigation
Press Menu to scroll menu options
Press Up▲ arrow to enter Menu option
Press Down▼ arrow to retun
Exit Menu System
Hold Menu button and press Enter◄ button
To Change A Setting
Press Enter◄ button to bring up brackets [ ]
Press Up▲ arrow button and Down▼ arrow button to
change setting
Press Enter◄ button to make selection, brackets
dissapear
*Recycle Key to the OFF position after changing a
setting*
Main Menus
>Active Engine Fault Codes
View/Scroll Active Codes
>Stored Engine Fault Codes
View/Scroll Stored Fault Codes
>Engine Parameters
800-446-9823
18
LCT6000