ODB SCL800SM-3X Owner's Manual
  1. Manuals
  2. Brands
  3. ODB Manuals
  4. Blower
  5. SCL800SM-3X
  6. Owner's manual

ODB SCL800SM-3X Owner's Manual

Automated self contained leaf collector
Hide thumbs Also See for SCL800SM-3X:
Table of Contents

Advertisement

Quick Links

SCL800SM-3X
SCL800SM-3X
Automated Self Contained
Automated Self Contained
Leaf Collector
Leaf Collector
Owner's Manual
Safety Manual
Pre-Operating Manual
Operating Manual
Maintenance Manual
Service Manual
Parts Catalog
2018 Diesel Edition
ODB Company
5118 Glen Alden Drive
Richmond, VA 23231
800-446-9823
www.leafcollector.com
Front Cover 816210

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCL800SM-3X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ODB SCL800SM-3X

Summary of Contents for ODB SCL800SM-3X

  • Page 1 SCL800SM-3X SCL800SM-3X Automated Self Contained Automated Self Contained Leaf Collector Leaf Collector Owner's Manual Safety Manual Pre-Operating Manual Operating Manual Maintenance Manual Service Manual Parts Catalog 2018 Diesel Edition ODB Company 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823 www.leafcollector.com...
  • Page 2 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!
  • Page 3 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.
  • Page 4 IF YOU HAVE A 74HP OR BELOW: THERE WILL BE A "LOW DEF FLUID" ICON ON THE SCREEN, THIS IS NORMAL. 75HP AND ABOVE: THE SCREEN CAN MONITOR YOUR DEF LEVELS AND NOTIFY YOU WHEN IT IS BELOW OPTIMAL LEVELS ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 5 THANK YOU Thank you and Congratulations on your purchase of your ODB Leaf Collector. Your ODB leaf col- lector has been carefully designed and manufactured to give you a maximum amount of dependabil- ity and years of trouble-free operation. Take comfort in the fact the ODB has been manufacturing municipal products since 1910 and takes pride in our product's quality and our customer service.

  • Page 6: Table Of Contents

    4.2 Maintenance and Lubrication .......................43 4.3 Lubrication: ............................44 4.3 Lubrication, continued; .........................45 4.3 Lubrication, continued; .........................46 4.3 Lubrication, continued; .........................47 4.4 Preventative Maintenance ........................48 4.5 Torque Values ............................53 4.6 Quick Reference Chart ...........................54 4.7 Kraft Fluid Drive Maintenance (Optional) ....................55 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 7: Table Of Contents

    5.40.8 IQAN Power Switch and E-Stop Wiring Diagrams ................93 6.0 ENGINE GROUP 6-0 ..................................95 6.1 Air Cleaner Group ............................96 6.2 Sheet Metal Group, SCL 3X ........................97 6.3 Engine Mount Group ..........................98 ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 8 10.6 Automated Door Latch Group ........................131 10.7 Manual Top Hinged Door (Optional) ......................132 10.8 Bottom Exhaust Group (Optional) ......................133 10.9 Hood Scoop Group (Optional) ........................134 10.10 Chipper Door Group (Optional) ......................135 ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 9 11-0 ...................................139 11.1 Boom Assembly, 3 Axis ..........................140 11.2 Hinged Boom Frame Assembly - 3 Axis ....................141 11.3 Auburn Gear Drive Assembly - 3 Axis .....................142 11.4 In-Cab Controls Mount - 3 Axis .......................143 INDEX Index .................................145 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 10: General Safety

    Front Cover ....................... 1 Table of Contents ....................5 1.0 GENERAL SAFETY 1.1 Safety Symbol Definitions .................11 1.2 Do’s and Do Not’s:..................12 1.3 Training: ..................... 14 1.4 Safety Decals ..................15 1.5 Serial Number Location ................17 ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 11 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.

  • Page 12: Safety Symbol Definitions

    Disregarding this safety warning WILL result in serious equipment damage, injury or possible death. Disregarding this safety warning CAN result in serious equipment damage, injury or possible death. Disregarding this safety warning MAY result in minor or moderate injury or property damage. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 13: Do's And Do Not's

    18. DO NOT operate unit if fuel is spilled or with fuel cap off. 19. DO NOT smoke or weld near the unit. 20. DO NOT run engine in an enclosed area. 21. DO NOT place hands or feet near moving or rotating parts. ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 14 Wash Hands after handling Engine Exhaust, some its constituents and certain vehicle components contain or emit chemicals known to the state of California to cause cancer and birth de- fects or other reproductive harm. 012213 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 15: Training

    Safety Section SAFETY PRECAUTIONS 1.3 Training: Improper use of the ODB leaf collector CAN result in severe per- sonal injury or death. All personnel using this leaf vacuum must be trained and qualified with all the operations, maintenance, repair and safety procedures defined in this manual.

  • Page 16: Safety Decals

    Warning - Head, Eye and Ear Protection 200109 Do Not Over-Lubricate 200179 Danger - Do Not Ride, Sit or Stand Call ODB Big Sticker Call ODB wide sticker 200177 Warning - Flammable 200182 Warning - Do not open cover while in operation...
  • Page 17 Safety Section SAFETY PRECAUTIONS ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 18: Serial Number Location

    The serial number tag is located on the chassis on boom side of the unit. It should be in front of the fenders going toward the front of the unit. (See figure 1.5a). figure 1.5a ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 19: Pre-Operating Section

    2.1 IQAN Display System and Controls - Overview ..........21 2.2 Joystick Controls: .....................22 2.2 Safe Operations: ....................23 2.3 Preparation For Operation .................25 2.4 Pre-Transport Checks ..................26 2.5 Personal Protective Equipment and Clothing ...........27 2.6 Work Site Preparation ..................28 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 20: Iqan Display System And Controls - Overview

    This button shuts down the system immediately in case of an emergency situation. Power Switch: This button turns the IQAN Display system on and off. IQAN Display System: This is the heart of the SCL800SM-3X system. It controls and monitors the engine, PTO, dump and 3 Axis boom systems. ODB COMPANY 800-446-9823...

  • Page 21: Iqan Display System And Controls - Overview

    Down Button: This button is used to navigate through the various display pages, menus and lists. Also used to de- crease the throttle of the engine. Menu Button: This button is used to access the System menu. ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 22 These Four (4) buttons have different functionality depending on the screen. These are the main but- tons that the user uses to select the screen or function they desire. The function key corresponds to the menu choice above the function key. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 23: Joystick Controls

    Bottom Yellow Button - Rear Door Unlock Dump Down PROPORTIONAL CONTROLS Dump Up The 3 Axis boom on the ODB leaf collector is proportional which allows the operator the greatest control of the boom possible. Deadman must be held at all times during dump.

  • Page 24: Safe Operations

    3. A record of mental stability with no history of epileptic seizures, dizziness, or any other disability that may result in injury to himself or others. If any of these requirements are not satisfied at any time, the person failing to meet these requirements MUST NOT OPERATE THIS EQUIPMENT. ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 25 7. Operators must not be under the direct or indirect influence of alcohol and/or drugs. This includes prescription drugs that could cause drowsi- ness, dizziness, or any other condition that would impair their ability to operate or use this equipment in a safe manner. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 26: Preparation For Operation

    9. Check all guards to ensure they are undamaged, in place and properly secured. 10. All decals must be in place and legible prior to operating the leaf vacuum. See the decal section for decal replacement. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 27: Pre-Transport Checks

    Check all cones, wheel-chocks, signs or other support tools and mate- rials to ensure proper stowage. Verify the driver of the unit is qualified to tow the type and weight of the unit. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 28: Personal Protective Equipment And Clothing

    Work clothes MUST be close fitting, but not restrictive of move- ment, without any loose parts that could be entangled in any parts of the leaf vacuum. This includes items such as jewelry, chains and backpacks. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 29: Work Site Preparation

    DO NOT allow pedestrians, children or animals near the work area. 7. Make sure that the exhaust hose (if equipped) fits properly into the box con- tainer so that all debris is blown into the box container. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 30: Operating Section

    3.4 Hose Boom Operation - 3 Axis, cont............36 3.4 Hose Boom Operation - 3 Axis, cont............37 3.5 Dumping the Body ..................38 3.5 Dumping the Body, continued ..............39 3.5 Dumping the Body, continued ..............40 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 31: Starting Engine

    Start (F1) Then Depress the F1 key to start the engine. (Fig. 3.1B) Throttle The engine throttle is controlled using either the arrow buttons on the IQAN or the Yellow Buttons on the Joystick. (Figure 3.1C) ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 32: Starting Engine, Continued

    Watch the coolant temperature gauge. Do not place engine under load until it is properly warmed up. The normal engine coolant tempera- ture range is 180 - 202 degrees F. Throttle Down Throttle Fast Figure 3.1C Start (F1) Throttle Slow ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 33: Engaging The Standard Pto

    IMPORTANT: If the unit experiences any heavy vibrations or makes any unusual noises, shut the engine down and after following the necessary safety guidelines, have a qualified technician investigate the cause. DO NOT operate a unit that is in a state of disrepair. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 34: Fluid Drive Coupler (If Equipped)

    IMPORTANT: If the unit experiences any heavy vibrations or makes any unusual noises, shut the engine down and after following the necessary safety guidelines, have a qualified technician investigate the cause. DO NOT operate a unit that is in a state of disrepair. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 35: Hose Boom Operation - 3 Axis

    (Fig. 3.3A) and then slide the red Slide button up to raise the boom (Fig. 3.3A) to raise the hose out of the cradle. NOTE: The "Deadman" (Fig. 3.3A) must be depressed first for any of the boom functions to work. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 36: Hose Boom Operation - 3 Axis, Cont

    Boom Up/Down Boom In PROPORTIONAL CONTROLS Boom Out The 3 Axis boom on the ODB leaf collector is propor- tional which allows the operator the greatest control of Left the boom possible. What does that mean? It means that the harder you...
  • Page 37 Left NOTE: Wet leaves will need higher rpm's to vacuum whereas dry leaves will only need minimal rpm's. Continue moving the nozzle slowly and carefully in a sweeping motion above the leaves while vacuuming. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 38: Hose Boom Operation - 3 Axis, Cont

    This will take you to another screen with a dial. Use the navigation buttons to Speed increase or decrease the speed. Press Control OK at the desired setting. (Fig. 3.3D) Figure 3.3C Figure 3.3D Navigation Buttons Down ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 39: Dumping The Body

    Make sure the surface is level and the ground is solid before dumping. Increase the throttle to 1,600 -1,800 rpm. Do not race the engine while using the hoist. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 40: Dumping The Body, Continued

    (Fig. 3.4E). DO NOT POWER HOIST DOWN. Figure 3.4D Unlock (F3) Door Lock Figure 3.4C Door Unlock Figure 3.4E Deadman Dump Up Dump Down Deadman must be held at all times during dump. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 41: Dumping The Body, Continued

    12 inches or the check valve will stop the body. Once the body is completely down close the latch Figure 3.4E hooks using the joystick top yellow button or the F2 Lock button on the IQAN display. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 42: Maintenance Section

    4.2 Maintenance and Lubrication ..................43 4.3 Lubrication: ........................44 4.3 Lubrication, continued; ....................45 4.3 Lubrication, continued; ....................46 4.3 Lubrication, continued; ....................47 4.4 Preventative Maintenance ....................48 4.5 Torque Values .........................53 4.6 Quick Reference Chart ....................54 4.7 Kraft Fluid Drive Maintenance (Optional) ..............55 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 43: Maintenance Overview

    4.1 Maintenance Overview: Only properly trained personnel should perform maintenance or re- pair on this equipment. Consult ODB before performing any main- tenance procedures that is not specifically covered in this manual. Improper maintenance or repair may void any and all warranties on this equipment.

  • Page 44: Maintenance And Lubrication

    Inspect all duct work for cracks, holes or wear Grease / Inspect wheel bearings for corrosion Change engine coolant* Check fuel tank for leaks Lubricate Hoist and Hinge Fittings * = see the engine owner's manual for complete details ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 45: Lubrication

    Any special or custom built units may have other lubrication procedures not directly mentioned in this manual. Please consult ODB before any lubricat- ing procedures not specifically mentioned in this manual. Proper lubrication of your unit correlates directly to how long your unit will last.

  • Page 46: Lubrication, Continued

    6. Hinge and Friction Points: Leaf vacuum operation and longevity can be improved by keeping hinges and friction points lubricated. ODB recommends that lubri- cation be performed weekly. Use SAE30 weight oil on hinges and a premium grade, high temperature lithium based EP#2 grease on friction points.

  • Page 47: Lubrication, Continued

    9. Hoist Hinge and Body Prop(s) Fittings (figure 4.3f): Each hinge pivot has a grease fitting that Figure 4.3f needs lubricating every 200 hours. The body prop(s) has a fitting at the pivot area as shown in figure 4.3h. Figure 4.3f ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 48: Lubrication, Continued

    EP#2 grease once a week. 11. Boom Cylinders (figure 4.3i): Grease the pivot joints of the boom cylinder with a high temperature lithium based EP#2 grease once a weak. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 49: Preventative Maintenance

    Any special or custom built units may have other preventative maintenance procedures not directly mentioned in this manual. Please con- sult ODB before doing any preventative maintenance procedures not specifi- cally mentioned in this manual. Proper preventative maintenance of your unit, just like lubrication, correlates directly to how long your unit will last.
  • Page 50 Check the side wall of the tire for proper inflation pressure. Torque all 1/2" diameter lug nuts from 90 to 120 foot pounds. Torque all 5/8" diameter lug nuts from 175 to 225 foot pounds. Consult the axle manufacturers owner's manual for more detailed information. ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 51 4.4 Preventative Maintenance, continued; Preventative Maintenance, continued; Trailer Brakes (if equipped): Most of the newer ODB leaf vacuums have electric brakes on the axle(s). It is critical that these brakes work properly. The trailer's brakes should be checked daily, before leaving the equipment yard, for proper operation.
  • Page 52 ALWAYS wear eye and hand protection when working with the bat- tery. BATTERY: ODB's units are supplied with "maintenance free" batter- ies so there is no need to check fluid levels but the battery terminals should be checked daily for corrosion. Remove any corrosion with a wire brush and coat the terminals with light grease or petroleum jelly to reduce the possibility of corrosion.
  • Page 53 Axle Hangers: The hanger bolts should be checked periodically for tightness and wear. Hydraulic Fittings: Check all hydraulic fittings for leaks and tightness. Any leak could become a hazard, fix immediately. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 54: Torque Values

    Tighten plastic insert or crimped steel-type lock nuts to approximately 50 percent of the dry torque shown inthe chart, applied to the nut, not the bolt head. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 55: Kraft Fluid Drive Maintenance (Optional)

    Maintenance Section Fluid Drive Coupler (Optional) 4.6 Kraft Fluid Drive Maintenance (Optional) ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 56 ***ALL SCREEN SHOTS SHOW ALL SYMBOLS ACTIVE. NORMAL OPERATION SOME SYMBOLS WILL NOT BE ACTIVE/SHOWN UNLESS THERE IS A FAULT.*** GREETING SCREEN F2 WILL CARRY YOU TO THE SCREEN BELOW TO VIEW AND CONTROL MANUAL ENGINE EXHAUST CLEANING. ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 57 SOOT LEVEL. SOOT LEVEL IS IN A RANGE FROM 0-5. 0 (ZERO) BEING CLEAN AND 5 BEING HIGHEST SOOT LEVEL. THE ENGINE WILL ONLY ALLOW A MANUAL CLEANING ABOVE A LEVEL THE ENGINE ECU WILL CONTINUALLY CLEAN AS LONG AS IT IS NOT INHIBITED. ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 58 Maintenance Section BELOW IS THE START SCREEN WITH SYMBOL NOTES: THE NORMAL SCREEN LOOKS LIKE THIS: ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 59 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!
  • Page 60 5.0 SERVICE SECTION 5.0 Service and Troubleshooting 5.10 Wiring Diagrams 5.20 Hoist Hydraulic System ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...
  • Page 61 5.4 Impeller Installation and Removal, continued ............66 5.5 Replacing the Blower Housing Liners ............... 67 5.5 Replacing the Blower Housing Liners; continued, ............ 68 5.6 Auto Mfg. Clutch Adjustment - 2008 and after ............69 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 62: Service Section

    (figure 5.1d) The frame should swing open on the hinge. Remove the housing bolts from the housing face to gain access to the impeller. To install reverse the above procedure. figure 5.1d Frame Bolt ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 63: Replacing The Drive Belt (If Equipped)

    (item A on figure 5.2b & 5.2c). There are 4, figure 5.2b one in each corner. This should allow the belt to have enough slack to slip out (figure 5.2d on next page). Engine Cam Nut Adjustment figure 5.2c Engine Mount Adjuster Engine Mount Adjuster ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 64: Replacing The Drive Belt (If Equipped)

    (item B Figure 5.2b). Be careful to keep figure 5.2b the engine level. After adjusting the engine height using the large nut, tighten down the 1/2" nut (Item A, figure 5.2b). Engine Cam Nut Adjustment figure 5.2c Engine Mount Adjuster Engine Mount Adjuster ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 65: Replacing The Drive Bearings(If Equipped)

    (fig. 5.3c) Using a punch, loosen the lock collar. (fig. 5.3d) figure 5.3d Pull the shaft out toward the blower housing. The bearing plate, front bearing and pulley should come out in one unit. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 66: Replacing The Drive Belt (If Equipped)

    Slide the shaft through the rear bearing (closest to the engine). Make sure the front locking collar is put on before the bearing. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 67: Replacing The Drive Bearings (If Equipped), Continued

    (figure 5.3g) Set Screw Do steps 11-14 for the other bearing also. Line up the pulleys and tighten the busing. figure 5.3g Re-install the belt guards and impeller as de- scribed earlier. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 68: Impeller Installation And Removal

    8. At this point it would be a good idea to inspect the blower Fig. 5 housing liners and blower housing for any damage or wear. Any damage or wear to the liners should be fixed by replacing the liners Belt immediately. Drive ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 69: Impeller Installation And Removal, Continued

    8. If the bushing has a set screw on it, tighten the screw snug with an allen wrench (Fig. 3). This will help keep the key in place. 9. Install the shaft protector on to the shaft (Fig. 4 or 5). Fig. 4 Direct Drive Fig. 5 Belt Drive ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 70: Replacing The Blower Housing Liners

    Tack weld the liner in place every 8 to 10 inches Stop Weld Piece to help keep the liner in place. Weld ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 71: Replacing The Blower Housing Liners; Continued

    Tack weld the long liner to the overlap piece and figure 5.5b tack weld around the liner as you did on the short liner. Install the two bolt-in liners just as they were removed. Weld Overlap Piece Stop Weld Piece Weld ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 72: Auto Mfg. Clutch Adjustment - 2008 And After

    (See PIC# 4) Move the adjustment nut to create the 1/8" gap. Re-install the return spring. Place the handle in the disengaged position. Check to make sure that the PTO output shaft turns freely. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 73: Hydraulic Diagram

    5.20 HYDRAULIC DIAGRAM 5.20 HYDRAULIC DIAGRAM 5.20.1 Hoist Hydraulic Diagram ............... 71 5.20.2 Valve Body Hydraulic Diagram ............. 72 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 74: Hoist Hydraulic Diagram

    Service Section 5.20.1 Hoist Hydraulic Diagram 012213 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 75: Valve Body Hydraulic Diagram

    Service Section 5.20.2 Valve Body Hydraulic Diagram ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 76: Iqan Advanced Screens

    5.30.4 Info Menu ....................79 5.30.4 Info Menu, continued ..................80 5.30.5 IQAN Error Codes ..................81 5.30.5 IQAN Error Codes, continued ..............82 5.30.5 IQAN Error Codes, continued ..............83 5.30.5 IQAN Error Codes, continued ..............84 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 77: Adjust Menu

    In/Out Speed- change from 0 - 100 percent b. For/Rev Speed - change from 0 - 100 percent c. Up/Dwn Speed - change from 0 - 100 percent 13. Setup (LOCKED) - should only be accessed by ODB service department. Down Adjust Menu Procedure (refer to figure 3.1A):...
  • Page 78 Fully read and understand the entire owner's manual before operating this equipment. Follow and obey all Navigation Buttons safety guidelines. Call ODB for any questions. Figure 5.30.1C Adjust Menu Procedure (refer to figure 3.1A): Adjust the settings by using the navigation buttons, up or down, then press OK to accept the new set- ting.

  • Page 79: Measure Menu

    Fully read and understand the entire owner's manual before operating this equipment. Follow and obey all safety guidelines. Call ODB for any questions. The IQAN main menu can be accessed at any time by pressing the Main menu button. (Fig. 5.30.1A)
  • Page 80 Aux 2 k. Throttle Up l. Throttle Dn m. ACC 3 5. Sensors - shows exact measurement of sensors a. Water Temp b. Oil Pressure Down c. Fuel Level d. Hyd Pressure Navigation Buttons Figure 5.30.1C Down ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 81: Preferences Menu

    Navigation Buttons Figure 5.30.3C 3. Use Navigation Buttons to change the Date or Time settings. (Fig. 5.30.3D) 4. Press Ok to accept the changes. Figure 5.30.3D Down Down Backlight (F2) Screen Saver (F2) Date (F1) Time (F2) ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 82: Info Menu

    (Fig. 5.30.4c) events and run time. (Fig. 5.30.4c) a. System Log a. System Log b. Events b. Events c. Run Time c. Run Time Down Down Navigation Buttons Navigation Buttons Figure 5.30.4C Down Down ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 83: Info Menu, Continued

    (F2), toggle between date and time (F3) and display Navigation Buttons Line/Page (F4). Figure 5.30.4E 3. Run Time - shows grand total of hours the unit has run. (Fig. 5.30.4F) Down Sort Order (F2) Date/Time (F3) Line/Page (F2) Navigation Buttons Figure 5.30.4F Down ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 84: Iqan Error Codes

    Fully read and understand the entire owner's manual before oper- ating this equipment. Follow and obey all safety guidelines. Call ODB for any questions. An error message could indicate that a hazardous condition exists. If precautions are not taken, this could result in death, serious injury or major property damage.

  • Page 85: Iqan Error Codes, Continued

    Fully read and understand the entire owner's manual before operating this equipment. Follow and obey all safety guidelines. Call ODB for any questions. Figure 5.30.5D The IQAN MD3 Screen will also display popup Error messages (Fig. 5.30.5D), simliar to the above, when an error has occured.

  • Page 86: Iqan Error Codes, Continued

    An error message could indicate that a hazardous condition exists. If precautions are not taken, this could result in death, serious injury or major property damage. Call ODB for any questions. Failure Modes The following tables includes information about the different possible failures that could occur for each module subsystem.
  • Page 87 5.30.5 IQAN Error Codes, continued Fully read and understand the entire owner's manual before operating this equipment. Follow and obey all safety guidelines. Call ODB for any questions. Figure 5.30.5C The XA2 and XS2 modules are flexible exansion modules designed for controlling hydraulic systems in vehicles and machinery.

  • Page 88: Wiring Diagrams

    5.40.5 Engine Side Rail Wiring Harness Diagram ..........90 5.40.6 IQAN MD3 Display Wiring Harness Diagram ..........91 5.40.7 IQAN E-Stop,Relay,Joystick & Door Lock Diagrams ......... 92 5.40.8 IQAN Power Switch and E-Stop Wiring Diagrams ........93 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 89: Wiring Harness Overview Diagram

    Service Section 5.40.1 Wiring Harness Overview Diagram For detailed Wiring Please see the appropiate section ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 90: Engine Wiring Harness Diagram

    Service Section 5.40.2 Engine Wiring Harness Diagram 012213 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 91: Valve Body Wiring Harness Diagram

    Service Section 5.40.3 Valve Body Wiring Harness Diagram ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 92: Xa2 And Xs2 Module Wiring Harness Diagram

    Service Section 5.40.4 XA2 and XS2 Module Wiring Harness Diagram ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 93: Engine Side Rail Wiring Harness Diagram

    Service Section 5.40.5 Engine Side Rail Wiring Harness Diagram 012213 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 94: Iqan Md3 Display Wiring Harness Diagram

    Service Section 5.40.6 IQAN MD3 Display Wiring Harness Diagram 012213 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 95: Iqan E-Stop,Relay,Joystick & Door Lock Diagrams

    4 pin conn. Male Pins Female Pins Door Locks and Mercury Switch PIN # WIRE USAGE White/Black Accessory 4 (Door Lock Limit Switch&Mercury Switch Lt Blue/White Door Lock Limit Switch Lt Blue/Black Door Lock Limit Switch Black/Green Mercury Switch ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 96: Iqan Power Switch And E-Stop Wiring Diagrams

    Service Section 5.40.8 IQAN Power Switch and E-Stop Wiring Diagrams ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 97 PARTS BREAKDOWN SECTIONS Engine Group Clutch Group Blower Housing Group Hydraulic Group 10.0 Chassis and Hopper Group 11.0 Hose Boom Group ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 98: Engine Group 6-0

    6.9 John Deere Common Engine Parts Group .............104 6.10 Remote Clutch / Throttle Circuit Board Assembly ..........105 6.11 Remote Clutch and Remote Throttle Assembly ...........106 6.12 Chaffe Eliminator Assembly, hinged ..............107 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 99: Air Cleaner Group

    Vacuator Valve UU-21.1330001 Pre Cleaner, Turbo III OD-X002102 Air Restriction Indicator OG-HS.52 Clamp P123462 Elbow, 3x3.5 Aluminum Pipe P105532 Elbow, 3in 90 Deg Aluminum Pipe P105608 Straight Coupling, 3in KUB.4028 1/2in Spacer (x2) OD-P777732 Mounting Clamp ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 100: Sheet Metal Group, Scl 3X

    Sheet Metal Front 4045.4002 Sheet Metal Rear 4045.4004 Sheet Metal Doors 4045.4003 Sheet Metal Upper Doors 4045.4005 Sheet Metal Hood 3029.2108 Rear Access Panel 4045.2102C Door HInge 4045.2102B Fill Door LCT60.624A Lift And Turn Latch 2856.28012 Door Grommet ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 101: Engine Mount Group

    Engine Mount, Front 4045.2152 Engine Mount, Rear 4045.2154B Side Rail, LH, except LCT650 4045.2153 Side Rail, RH LCT604.603.1 Engine Adjuster Nut LCT604.603.1A Engine Adjuster Bracket LCT604.603.2 Adjustable Motor Mount LCT604.603.B Engine Base Adjuster STD.6304B Wiring Harness Bracket ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 102: Muffler (Exhaust) Assembly

    6.4 Muffler (Exhaust) Assembly ITEM # PART NUMBER DESCRIPTION 4045.4105 Muffler J000200 Clamp, muffler ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 103: Radiator Assembly Group

    4045.2190B Front Fan Shroud 2561.26012 Radiator Grommet 4045.2190A Rear Fan Shroud 4045.2151F Radiator Bolt Bracket AT35158.A Radiator Fan ZSB.500.750 Shoulder Bolt R128443 Fan Spacer G8M8X090 Spacer Bolts, 4 required JDTH.1 Upper Radiator Hose 10300 Radiator Cap ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 104: Battery Group

    Negative Battery Cable, all - 15" long BTC.R Terminal Cover, Red, all Terminal Cover, Black, all LCT600.72SS Red Cable to Hydraulic Boom Pump, SCL/600/6000 - 72" long LCT600.24SS Ground (Black) Cable to Chassis, 600/6000/60C - 24" ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 105: Remote Clutch / Throttle Circuit Board Assembly

    Actuator Wiring Harness only available as an assembly Instrument Panel and Nozzle Wiring Harness Note: This assembly is only used if the unit is equipped with the OPTIONAL remote clutch or remote throttle configuration. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 106: Remote Clutch And Remote Throttle Assembly

    STD.6553 Throttle Cable - direct drive STD.6570 Limit Switch Bracket STD.6553B Throttle Cable - belt drive BSB632X.1.00 Bolt 1in STD.6557 Throttle Acutator (bottom) NS632ESN STD.6558 Cable Adaptor-throttle BSB1032X.375 Bolt Bolt .375in STD.6552A Cover STD.2916 CPC Housing ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 107: Chaffe Eliminator Assembly, Hinged

    Chaffe Assembly RAS.207 Shaft Bracket RAS.206 Hinge RAS.110 Brush Holder RAS.109 Strip Brush RAS.201 RAS.204 Flange Bearing RAS.203 Barrell RAS.105 Shaft RAS.205 Air Deflector RAS.202 Support Frame RAS.114 Angle Frame, LCT650 only RAS.208 Angle Frame, 3029 Only ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 108 7.5 Kraft Fluid Drive Group (Optional) ..............113 7.6 Kraft Fluid Drive Installation (Optional) ............114 7.7 Kraft Fluid Drive Breakdown (Optional) ............115 7.8 Kraft Fluid Drive Common Parts (Optional) ........... 116 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 109: Autohd Pto Clutch Group

    Decal, Diesel Clutch 011113 Note: *48080050 and 48080050.8OF includes the everything on this page, the AutoHD PTO page and the AutoHD linkage page. This is the complete PTO/Clutch assembly. It does not include the clutch assist assembly. ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 110: Autohd Pto Assembly Group

    Key, belt drive units only OD-41500203 PTO shaft OD-45000105 Bolt, 9/16-12 x 1- 3/4" OD-45000177 Bolt, 9/16-12 x 3" OD-45000103 Lock Washer, 9/16" OD-41500204 PTO Housing OD-41500242 PTO Collar, 03/08 - present OD-41500207 PTO Bearing, Front ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 111: Autohd Pto Linkage Group

    Linkage Rod End 45000015 Locknut, 1/4 - 28 see below Shaft, Lever 41500044 Handle 41500175 Boot 41500102 Shaft Housing, AutoHD 41500164 Alignment Tool 41500043 Grease Zerk 41500103 Alignment Tool Item #7 Unit Auto HD 011113 SCL800/60C 41500041A.HD ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 112: Clutch Assist Group

    400050.A Clutch Cylinder 400054.C Cylinder Support Bracket, JD 41500095 Clutch Bracket Arm, Auto HD 41500019 Linkage, Rod end 41500019A Linkage, Threaded insert 400050.C1 Bearing 41500102 Pivot Shaft Tube, Auto HD 41500041A.HD Pivot Shaft, 400050.C2 Spacer 011113 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 113: Kraft Fluid Drive Group (Optional)

    7.5 Kraft Fluid Drive Group (Optional) Fluid Drive Coupler (Optional) ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 114: Kraft Fluid Drive Installation (Optional)

    7.6 Kraft Fluid Drive Installation (Optional) Fluid Drive Coupler (Optional) ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 115: Kraft Fluid Drive Breakdown (Optional)

    7.7 Kraft Fluid Drive Breakdown (Optional) Fluid Drive Coupler (Optional) ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 116: Kraft Fluid Drive Common Parts (Optional)

    7.8 Kraft Fluid Drive Common Parts (Optional) Fluid Drive Coupler (Optional) ITEM # PART NUMBER DESCRIPTION UU-TFP7018CC 390 Degree Fuse Plug, 5/8" UU-TFP2292 Seal Kit UU-8202AD Roller Bearing UU-TFP103602X Shaft UU-8002DX Bearing, small UU-8002AS Ball Bearing UU-KPC2.01.5 Fluid, 1-1/2 gallon ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 117: Blower Housing Group 8-0

    8.0 BLOWER HOUSING GROUP 8.0 BLOWER HOUSING GROUP 8-0 ..........................117 8.1 Blower Housing Face Group ................. 118 8.2 Belt Drive Assembly ....................119 8.3 Blower Housing Group - Belt Drive ..............120 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 118: Blower Housing Face Group

    6410.51 TCC.2015B Wiring Harness, Limit Switch, Fuel Sender SCL821.817BD Exhaust Duct Gasket, Belt Drive only SCL822.875 Adjustable Flange (inside nose cone)- belt drive STD.4000.A Limit Switch Box Assembly STD.4000 Limit Switch Box STD.4001 Limit Switch Actuator ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 119: Belt Drive Assembly

    Step Down Key 800.2730 Cover Plate/Shaft Guard 800.2750A Belt Guard Shaft UU-199.T52500H Lube Hose, short 800.2750 Belt Guard, LH & RH UU-199T552500B Lube Hose Bracket LCT609.602 Latch, top and bottom 800.2702 Engine Adaptor, Rear 800.2702 Engine Adaptor, Front ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 120: Blower Housing Group - Belt Drive

    Bearing Plate LCT620.602A Curved Liner LCT620.603 Liner Bolt, 1/2-13x1-1/4 Flat Head LCT620.603N Liner Nut, 1/2-13 ESN 800.3028 Impeller LCT650.601 Bushing with Bolts LCT650.601F Key, Straight LCT.600.615 Shaft Protector 5CZ.500.750 Bolt LCT620.604 Straight Liner 800.609 Housing Support Tab ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 121: Hydraulic Group 9-0

    9.0 Hydraulic Group 9.0 Hydraulic Group 9-0 ..........................121 9.1 Hydraulic Tank Assembly - 3X ................122 9.2 Valve Body Group ....................123 9.3 Valve Body Mounting Group ................124 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 122: Hydraulic Tank Assembly - 3X

    Filter Assembly #16 x 30" Long TCC.1105D Filter Element Only HYF.1173 Fitting, Tank to Hose Fitting, 90 Degree TCC.3002 Hydraulic Pump TCC.2018 Hydraulic Hose, Return TCC.2017 Hydraulic Hose- Pressure #8, 125" long #8 x 117.5" Long ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 123: Valve Body Group

    Swing F/R, Boom Out/In Coil TCC.3024 Boom Up/Down Relief TCC.3022 Boom Out/In Counterbalances TCC.3017 Dump Up/Down Valve TCC.3023 Dump Up/Dwn Counterbalances TCC.3013 Boom Down On/Off Valve TCC.2009 Pressure Sensor TCC.3021 Swing Forward/Reverse TCC.2007 Temperature Sensor Counterbalances ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 124: Valve Body Mounting Group

    9.3 Valve Body Mounting Group ITEM # PART NO. DESCRIPTION 800.601D Valve Body Bracket TCC.3000 Valve Body TCC.1100BC Valve Cover TCC.3001 Filter Assembly TCC.3001F Filter TCC.3004 Transducer TCC.3003 Harness; Module/Manifold w Pressure Filter ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 125: Chassis And Hopper Group 10-0

    10.9 Hood Scoop Group (Optional) .................134 10.10 Chipper Door Group (Optional) ..............135 10.11 Light Bar Group (Optional) ................136 10.12 Backup Camera Group (Optional) ..............137 10.13 Rear Chipper Hitch Package (Optional) ............138 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 126: Fuel Tank Group

    Fuel Fitting, not pick up 800.2527 Fuel Fitting Pickup tube and screen 800.4506 Tank Support Bracket, Bottom 800.4504 Tank Support Bracket, Front 800.4505 Tank Support Bracket, Top HKL.104 Tank Support Bracket, Top, Hooklift Models, Wide 800.2506B Fuel Tank Wiring Harness ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 127: Box Container Screens

    091913 ITEM # PART NUMBER DESCRIPTION SCL805.810 Screen, 2 required for 14/20 CY 3 required for 25/30 CY SCL805.810M Replacement mesh screen, 36”W x 100’ roll OD-200008 Spring Clip OD-7502.99 Lock down bracket OD-800.2807 Screen Retainer ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 128: Chassis Group

    TCC.1108 Tread Plate Platform *Sept 2013-Nov 2013(needs 2); (Champion/Godwin TCC.1108B Step Plate Bracket Hoist) 6410.51 Body Limit Switch **thru Sep 2013 and Dec. 2013 and after (needs 2) TCC.1114 Poly Fender (1 fender) (Crysteel Hoist) 111413 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 129: Light And Reflector Group

    LED Marker Light, Yellow-- front of unit SCL800.028 Door Hinge STD.2213.A LED Strobe Light with Flasher STD.2414 LED Tail Light Assembly (after 01/05) 94706 Plug Harness (after 01/05) 60700 Oval Grommet for tail light LCT60.615B License Plate Light LCT600.010 License Plate Bracket ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 130: Box Interior Group

    Nose Cone Liner (Direct Drive w/Bottom Exhaust) SCL800.881 Deflector Rubber Retainer 800.2805 Nose Cone Adjustable Insert - BELT DRIVE UNITS ONLY, used July 2005 and after SCL800.035 Door Seal Bracket - vertical SCL800.030 Door Seal Rubber - vertical, same as #2 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 131: Automated Door Latch Group

    800.436 Switch Actuator Cam 800.405 Center Pivot Arm 800.432 Limit Switch Plate 800.413 800.447 Shaft Coupling, Bolt On 800.414 Key, Hook Assembly 800.447S Shaft Coupling, Slot Style *Note: Item #21 is on NON Computer models only ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 132: Manual Top Hinged Door (Optional)

    Door Rod 800.2934 Truss Nut 800.2826 Rod Holder 800.2827 Slide Pad 800.2935 Top Truss 800.2828 Center Gusset 800.2936 Bottom Truss 800.2829 Door Latch Pin 800.2940 Hinge Set 800.2930 Door Latch Base 800.2937 Hinge Bolt 800.2931 Handle ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 133: Bottom Exhaust Group (Optional)

    Side Panel Flange, LH LCT609.602 Latch 8BXOH.001B Tab/Bracket 800.2907 Hinge 550.1830 Bumper Guard 800.2914 Air Deflector Skirt (welded on) 800.2909B Nut Plate RH 800.2901 Side Panel, RH 800.2909C Nut Plate LH 800.2902 Center Side Panel, 25CY only ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 134: Hood Scoop Group (Optional)

    SCL800.029 Complete Assembly 800.1905 Rear Panel 800.1902 Front Panel 800.1903 Cross Brace 800.1906 Hat Channel Nut 800.1901 Hat Channel Bracket 800.1904 Side Stiffener 800.1902L Side Panel Left Hand 800.1902R Side Panel Right Hand 800.1907 Screen Retainer ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 135: Chipper Door Group (Optional)

    DESCRIPTION 8X-THDCH Door Assembly, Chipper Style only 800.800 Chipper Access Door 800.2712 Pin Bracket (comes with #6 pin) - not sold separately 800.2712 Pin (comes with #5 bracket) - not sold separately SCL800.800 Blower Exhaust Cover ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 136: Light Bar Group (Optional)

    10.11 Light Bar Group (Optional) OPTIONAL ITEM # PART NUMBER DESCRIPTION 550.008 Light Bar Bracket 660700 Grommett STD.2414 Strobe Light Assembly ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 137: Backup Camera Group (Optional)

    10.12 Backup Camera Group (Optional) OPTIONAL - Sony ITEM # PART NUMBER DESCRIPTION UU-56-NTSC-2 Complete Assembly Monitor Mounting Bracket LCD Monitor Camera Camera to monitor Harness Input Wiring Harness ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 138: Rear Chipper Hitch Package (Optional)

    10.13 Rear Chipper Hitch Package (Optional) OPTIONAL ITEM # PART NUMBER DESCRIPTION PH15 Pintle Eye UU1235 Connector UU56-NTSC-2 Rear Camera Package STD.2414 Brake Light LCT600.010 Licence Plate Bracket LCT60.615B License Plate Light STD.2213 Strobe Light ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 139 11.1 Boom Assembly, 3 Axis ..................140 11.2 Hinged Boom Frame Assembly - 3 Axis ..............141 11.3 Auburn Gear Drive Assembly - 3 Axis ..............142 11.4 In-Cab Controls Mount - 3 Axis ................143 INDEX Index ..........................145 ODB COMPANY 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 140: Boom Assembly, 3 Axis

    LCT616.601MA.HD Hose Nozzle, 45 degr. 800.1012 Cradle Arm, Down Exhaust LCT616.616 Hose Clamp 800.1010 Cradle SCL816.502A1 Bearing SDH.16.120.UC Intake Hose, 10' Long SDH.16.144.UC Intake Hose, 12' Long HYF.1028 Fitting, 90 degree swivel LCT616.603U Hose Support Band ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 141: Hinged Boom Frame Assembly - 3 Axis

    Bearing, 4 Bolt 550.1808B Bolt 1/2-20x6 800.707B Boom Mast Knuckle 800.1808 Spring 800.704B* Auburn Gear Drive *see breakdown on next page 550.1808C Spacer 1 1/4" 800.701C Hydraulic Motor 6072K44 Ball Joint 800.701CB Motor Bolts ZESNC.50 Nut 1/2-20 ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 142: Auburn Gear Drive Assembly - 3 Axis

    Pipe Plug 03-04-101-09 Pipe Plug 641008 Bearing and Seal Kit, includes #2,3,4,8 and 10 04-01-101-17 Bearing Cone 641017 Seal Kit, includes #2 & #10 14-02-410-003 Retaining Ring Kit 618318 Gear Bolt Ring Gear 618318.N Carrier Assembly ODB COMPANY 800-446-9823 SCL800SM3X...

  • Page 143: In-Cab Controls Mount - 3 Axis

    Display Box Bottom STD.3118C Mounting Plate TCC.1109F Knob, Adjustment STD.4204 Joystick TCC.2043.B Guard TCC.1109B Swivel Mount Kit *Male Mounting Plate VF4-15F11 Relay on Wiring Harness *Swivel Arm x2 TCC.2060 Diode *Female Mounting Plate TCC.1109C Telescoping Tube ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 144 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.

  • Page 145: Index

    PTO Clutch 103 Control Valve 116 PTO, Fluid Drive 109 Counter Balance Valve 116 Impeller 113 PTO Linkage 105 Cover Plate 112 Inspection Door 111 Pulley 112 Cradle Arm 128 Intake Flange 111 Crossover Relief Valve, ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 146 Table of Contents 5 Temperature Sensor 116 Throttle Cable 100 Throttle Connector 97 Throw out Bearing, 103 Torque Coupling 100 Tread Plate 120 Valve 116 Valve Bod 116 Valve Body 116 Valve, Check 116 Valve, Counter Balance 116 ODB COMPANY 800-446-9823 SCL800SM3X...
  • Page 147 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!

Table of Contents