Patlite WD PRO Series Instruction Manual page 7

Wireless Data Communication System - WD PRO Series Instruction Manual
●Do not install this product near other electrical appliances. If you install this product near a facsimile,
personal computer, television, microwave oven, or equipment using a motor, this product may not operate
properly.
●Do not use this product with the O-ring or waterproof gasket removed. This will lower waterproofing
performance. Failure to follow this instruction could result in product failure.
●Do not use this product in applications that require a high-degree of reliability or real-time performance. If
there are communication problems, this product cannot retrieve accurate data.
●Do not use this product near fire, in hot or humid environments, or where corrosive or flammable gas is
present. Failure to follow this instruction could result in product malfunction.
●Do not use or store this product in the following locations. Failure to follow this instruction could result in
product malfunction or failure.
・Environments with poor breathability and ventilation.
・Near equipment that generate strong electrical or strong magnetic fields.
・Places exposed to direct sunlight.
・Locations subject to shock and vibration.
Prohibited
・Near heating appliances.
・Environments where there is dust or iron powder.
・Locations where the product may fall and break.
・Locations exposed to salty sea air.
●Attach the cap (included) to the cable gland. Waterproofing performance is lowered if the cap is not
attached. Failure to follow this instruction could result in product failure.
●When the RS-232C cable is not passed through the cable gland, attach the sealing plug (included).
Waterproofing performance is lowered if the sealing plug is not attached. Failure to follow this instruction
could result in product failure.
●Do not touch the connector terminals inside the unit when attaching or removing each unit or head cover.
Failure to follow this instruction could result in product failure.
●Do not apply voltage to the flashing common line or external input common line. Failure to follow this
instruction will result in product failure.
●Operate this product only after thorough testing in the customer environment.
●Pay close attention to the polarity of the power supply before connection. Connecting the power supply
incorrectly could result in product failure.
●To clean this product, wipe with a soft cloth dampened with water. Do not wipe with cleaners containing
thinners, benzine, gasoline, or oil.
Mandatory
●To maintain dust and waterproofing performance, always use this product with the transmitter, LED unit,
and head cover or buzzer unit securely attached.
●When removing covers or packing, which are attached to this product, be careful not to snag the product.
Failure to follow this instruction could result in product failure.
CAUTION
7
1. Before you begin