Wdt-Pro Installation; Installing And Removing Wdt-Pro; Installing And Removing Wdb-D80S - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

7.2 WDT-PRO Installation

7.2.1 Installing and Removing WDT-PRO

When installing or removing WDT-PRO, follow the instructions below to attach and detach parts (such as the LED
unit and buzzer unit) from the LR Signal Tower.
Before any work is done, disconnect the power.
Attach the WDT-PRO directly on top of WDB-D80S. Other units cannot be connected.
The maximum number of attachments per Signal Tower is five LED units + one buzzer unit. Do not attach units
beyond that.
Do not apply excessive force to units. Failure to follow this instruction could result in product damage.
Do not touch the connectors on the units or the LED in LED units. Failure to follow this instruction could result in
product damage.
Securely lock each unit when attaching. Failure to secure units could result in product damage.

7.2.1.1 Installing and Removing WDB-D80S

■ Attach
Align WDT-PRO with the positioning mark on the
WDB-D80S and turn clockwise to lock.
WDT-PRO
Positioning Mark
Positioning Mark
WDB-D80S
WARNING
CAUTION
■ Detach
While holding the WDB-D80S, turn
WDT-PRO counterclockwise to release the
lock, then lift up.
WDT-PRO
Positioning Mark
WDB-D80S
36
■ How to Read the Positioning Mark
[When Locked]
WDT-PRO
WDB-D80S
[When Unlocked]
WDT-PRO
WDB-D80S
7. Operation
Condition when
locked
Condition when
unlocked