Table of Contents
Advertisement
Wireless Data Communication System - WD PRO Series Instruction Manual
7.3.5 Initializing WDB-D80S, WDT-PRO
The initialization procedure is as follows.
Step
Set WDB-D80S DIP switch 1 ON.
1
Turn ON the power supply.
2
After a few seconds, the WDT-PRO indicator alternates Red→Green→Red→Green...
Status lamps on the WDB-D80S, LED1 is red and LED2 is green.
3
Turn OFF the power supply.
Set WDB-D80S DIP switch 1 OFF.
4
5
Initialization is complete.
* For the list of settings that are initialized, refer to "7.3.1 Setting up WDB-D80S, WDT-PRO Main Unit( P.39)".
Operation
43
7. Operation
Advertisement
Table of Contents
