Using Wdb-D80S, Wdt-Pro; Setting Up Wdb-D80S, Wdt-Pro Main Unit; Setting Up The Main Unit; Setup Items - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

7.3 Using WDB-D80S, WDT-PRO

7.3.1 Setting up WDB-D80S, WDT-PRO Main Unit

7.3.1.1 Setting up the Main Unit

・WDS-WIN01 configuration software is required. Download the software from our website. Install the software on
the computer that will be used to set up and configure the system. (Member registration is required for down-
loading from the home page.)
・For information about usage and setup, refer to ☞ "WDS-WIN01 Instruction Manual".

7.3.1.2 Setup Items

Setup items are as follows.
Setup Item
ExtendedPanID
Settings
Wireless
Settings
Frequency Channel
Settings
Format of Signal
Tower Settings
Input Information
Transmission
Timing Setting
Periodic
Transmission
RS-232C
Communication
Settings
Baud rate
Data Length
Parity
Stop Bit
Operation
Settings
Simple Counter
Settings
Determine Signal
Tower Input Setting
Power Supply
Settings
Determine
Simultaneous Input
Sensitivity Setting
Input Information
Transmission
Format Setting
Receive Data File
Format Setting
* 1 For this product's settings, select [Power Supply Wire]. For information, refer to ☞ "WDS-WIN01 Instruction Manual".
* 2 Save destination is different for each setting.
WDS-WIN01
Default Value
Setup Items
ExtendedPanID 0000 0000 0000 0000
Frequency
Channel
Format of Signal
Tower
Transmission mode On change
Periodic
Transmission
-
Baud rate
Data Length
Parity
Stop Bit
Counter Settings Do not use
Determine Signal
Flashing (medium)
Tower Input
Power Supply
Power Supply Wire
Settings
Determine
Simultaneous Input High sensitivity
Sensitivity Setting
Input Information
Transmission WDT-LR Format
Method
Direct Communication
Receive Data File
Format
39
Save
Destination*
Select all
Standard WDT-PRO
None
-
9600
8
None
1
WDB-D80S
Format
7. Operation
References
2
☞ 6.1.2 About Grouping and
ExtendedPanID(P.19)
☞ 6.1.1 What is
the WD Wireless
Network?(P.18)
☞ 8.4.2 Information
Transmission
Function(P.55)
☞ 8.3.1 Communication
Setup Function(P.53)
☞ 8.2.5 Simple Counter
Function(P.52)
☞ 8.2.1 Determine Signal
Tower Control Input
Function(P.48)
*1
☞ 8.2.3 Function to
Determine Simultaneous
Input of Signal Tower
Control Line and External
Input Line(P.51)
☞ 8.4.2 Information
Transmission
Function(P.55)
☞ 8.3.2 Receive Data
Function(P.53)