Equipment Installation; Equipment Settings; Wdb-D80S, Wdt-Pro Installation; Checking Connections To Wdr - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

6.3.2 Equipment Settings

・"6.3.1 Setup Information"Use the setup information, refer to ☞ "6.3.1.Setup Information", to prepare the
equipment. For system configuration when setting up equipment, refer to "5.2.2.2 WD System Configuration at
Maintenance( P.14)".
Use the system configuration software WDS-WIN01 for equipment settings. Install WDS-WIN01 on the
maintenance PC and set up the equipment. For using WDS-WIN01, refer to ☞ "WDS-WIN01 Instruction Manual".
・The setup procedure is as follows.
Step
Prepare required equipment and create the
1
maintenance environment.
Set up communication settings between WDR
2
and maintenance PC.
3 Set up WDB-D80S and WDT-PRO.
4 Set up the WDR settings.

6.4 Equipment Installation

When deciding the installation location of each device, carefully review the following procedure regarding installation
location. The installation location could cause problems such as unstable operation or communication failure.
Install devices only after equipment setup is complete.

6.4.1 WDB-D80S, WDT-PRO Installation

The installation process is as follows.
Step
1 Install WDB-D80S to the mounting surface.
2 Wire the WDB-D80S.
3 Attach WDT-PRO to WDB-D80S.
4 Attach the LED and buzzer units to WDT-PRO.

6.4.2 Checking Connections to WDR

The checking process is as follows.
Step
Check the product's wireless status.
・Turn on this product and WDR.
1
・Use the WDT-PRO indicator to check the
wireless status.
Check the settings for this product and WDR.
2
・Use WDS-WIN01 to check the content of
setup items.
Operation
Operation
Operation
Refer to ☞ "WDS-WIN01 Instruction Manual"
Refer to ☞ "WDT-5LR/6LR Instruction Manual"
☞ 7.3.1 Setting up WDB-D80S, WDT-PRO Main Unit(P.39)
CAUTION
☞ 7.1.1 Installing and Removing WDB-D80S(P.25)
☞ 7.1.4 WDB-DB0S wiring(P.32)
☞ 7.2.1.1 Installing and Removing WDB-D80S (P.36)
☞ 7.2.1.2 Attaching the LED Unit and Buzzer
Unit(P.37)
☞ 7.3.4 Checking Operations with WDT-PRO
Indicator(P.42)
Refer to ☞ "WDS-WIN01 Instruction Manual"
24
6. Installation
References
References
References