Required Equipment; Wdb-D80S Dip Switch Operations - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

7.3.1.3 Required Equipment

・For system configuration when setting up equipment, refer to "5.2.2.2 WD System Configuration at Mainte-
nance( P.14)". Use the system configuration software WDS-WIN01 for equipment settings.
・Install WDS-WIN01 on the maintenance PC and set up the equipment. For information about using WDS-
WIN01, refer to ☞ "WDS-WIN01 Instruction Manual".
・The setup procedure is as follows.
Step
Prepare required equipment and create the
1
maintenance environment.
Set up communication settings between WDR
2
and maintenance PC.
3 Set up the WDT-PRO and WDB-D80S settings.
4 Set up the WDR settings.

7.3.2 WDB-D80S DIP Switch Operations

Do not use excessive force on this product. Failure to follow this instruction could result in deformed frame and product
damage.
Do not use sharp tipped objects with this product. Operation may become impossible as scratches develop on switches
and switch contacts are interfered with.
Do not set ON switches 2 to 4.
The product's DIP switches are located where you detach the direct mount bracket from the WDB-D80S.
●DIP Switch Settings
Switch number
Initialize setting values
1 ・OFF: Normally use with this setting OFF.
・ON: Initializes the value for various settings.
OFF (static)
2
* Do not change.
OFF (static)
3
* Do not change.
OFF (static)
4
* Do not change.
Operation
CAUTION
DIP Switches
Switch number
Description
40
References
Refer to ☞ "WDS-WIN01 Instruction Manual"
Refer to ☞ "WDT-5LR/6LR Instruction Manual"
☞ 7.3.1 Setting up WDB-D80S, WDT-PRO Main
Unit(P.39)
Initial Settings
7. Operation
OFF
OFF
OFF
OFF