Release Remote Control Function - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

8.1.3 Release Remote Control Function

Function that enables operation transition from "8.1.2 Remote Control Function" to "8.1.1 Signal Tower Control
Function". Run this function using one of the following methods.
No.
1 Set the clear input line from OFF to ON.
When the command is started (refer to ☞ "8.1.2 Remote Control
2 Functions") specify the enable control time. Remote control is released
after the enable control time elapses from when control started.
Remote control is released after a specific command is received from
3 the host. And when release remote control is run, a specific command
is transmitted to the host notifying it no longer has control.
ON
Clear Input
Operation
WDB-D80S \
WDT-PRO
・Set up time elapses
・Transmit release control command
Release Control Notification
47
8. Function Details
Result
The remote control function is
released, and a release control
notification is transmitted to the host.
Host PC