Table of Contents
Advertisement
Wireless Data Communication System - WD PRO Series Instruction Manual
5.2.2.2 WD System Configuration at Maintenance
●Configuration diagram
WD System
WDT-PRO / WDB-D80S
micro-USB
Connector Socket
● Configuration
Item
WDT-PRO
WDB-D80S
WDR
WDS
Maintenance PC
1
2
LAN Cable*
*
3
4
USB Cable*
*
(This Product)
3
5
micro-USB Cable*
*
* 1 When configuring the WDR LAN settings, connect with a LAN cable.
* 2 When connecting the WDR directly to the host PC with a LAN cable, use a cross cable.
* 3 Use USB and micro-USB cables that are 3m or shorter.
AC Adaptor (option)
* 4 Do not connect LAN and USB cables at the same time.
* 5 Use the micro-USB cable with this product's power supply only. The USB driver may be installed on the maintenance PC,
but this is not an issue.
When using a USB connection between this product and a computer, do not let the product's power supply contact the
computer or peripheral devices.
Failure to follow this instruction could result in burns and ignite the product. For example, when grounding the positive
terminal of this product's power supply, do not frame ground the computer, which is connected to this product via
USB. Depending on the computer, some negative terminals on the USB port are attached to the connector's outer
shell. When such a computer is connected to this product, the computer's FG (housing) and negative terminal of this
product's USB port are connected. In this state, if the computer is attached to the metal portions where the positive
terminal of this product's power supply is grounded, 24 V will be applied to this product's negative terminal on the USB
port, which will lead to fire.
WDR
Bottom
Number of configuration items
Units as required
1 unit
1
1 unit
1
1
1
*Only when connecting
to the LAN, connect
supplied AC adaptor
LAN (Cross Cable) or
USB Cable
micro-USB Cable
WDT-6LR-Z2-PRO
WDB-D80S-PRO
WDR-LE-Z2
WDS-WIN01 *Version 1.03 or later
WARNING
14
5. Operation Overview
Maintenance PC
WDS
Models
-
-
-
-
Advertisement
Table of Contents
