Wdb-Db0S Wiring; Wiring When Lighting Control And External Input, And Clear Input Control Are On Different Equipment - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

7.1.4 WDB-DB0S wiring

There are two types of wiring for this product, lead wiring and terminal connector wiring.
Unused lead wires do not have to be connected to external contacts. But in so doing, insulate the leads of unconnected
lead wires, one by one. Failure to follow this instruction could result in a short-circuit and product damage.
Do not pull lead wires, or stuff them into the main body. Failure to follow this instruction will result in product failure.
To protect external equipment, install a fuse on the power supply side.
Be sure wiring is carried out correctly. Failure to follow these instructions could result in burning internal circuits or fire.
●When extending the wires, consider the voltage drop along with appropriate length and diameter of wires.
●Be sure the power is disconnected before any wiring.
●When using an external contact with a transistor, consistently use either NPN type or PNP type transistors.
●You cannot use a mix of NPN type and PNP type transistors.
7.1.4.1 Wiring When Lighting Control and External Input, and Clear Input Control are on Different
Equipment
Wiring example for each type of external contact. If you have any questions about a special application for this
product, please contact your nearest PATLITE sales representative.
* Wiring example for attaching LED and buzzer units.
* To both turn on the lamp and flash the lamp, you need to prepare separate external contacts for turning the lamp on and for
flashing the lamp.
External Contact Classification
Contact Relay
External
Input/Clear
Input
External
Contact
Do Not Apply Voltage!
CAUTION
NOTICE
Tube color: Black
Clear Input
Black
Flashing Common Line
External Input 1
Red
LED Red
External Input 2 Orange
LED Amber
External Input 3
Green
LED Green
External Input 4 Blue
LED Blue
External Input 5
White
LED White
External Input 6 Purple
Buzzer
External Input 7
Amber
External Input 8
Brown
Power Supply Wire
External Input Common line Gray
Power Supply Wire
32
Do Not Apply Voltage!
Tube color: Gray
Brown
Red
Orange
Green
Blue
White
Purple
Gray
Amber
Fuse
RS-232C Connection
1A
7. Operation
Flashing/
Buzzer
External
Contact
Light on/
Buzzer
External
Contact
24 VDC (Class 2) (No polarity)