Safety Precautions - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

1.2 Safety Precautions

●This wireless data communication system (hereby referred to as "this product") gets various data
●Do not use this product in the vicinity of implanted cardiac pacemakers and other medical
●Do not use or install the receiver in locations where liquids such as water is present, oil will
●To prevent accidents, do not use this product other than for its intended purpose and do not run
●This product is not intended for use where high reliability is required and where human life is
Prohibited
●Do not modify or disassemble this product. Failure to follow these instructions could result in fire
●Do not use this product when there is condensation. Failure to follow these instructions could
●Do not allow liquids to enter the receiver, and do not allow it to have contact with metallic objects.
●Request the installation and wiring be performed by a professional contractor if construction work
●Turn off the power before performing any electric wiring or product installation. Failure to follow
●Always use a power supply within the operating voltage range. Failure to follow this instruction
●In places such as aircraft and hospitals, turn off this product where usage of wireless devices is
●We cannot foresee all circumstances concerning the handling and dangers associated with this
Mandatory
●In the unlikely event that there is an abnormal situation such as smoke or odors emitting from the
●Take the following precautions to prevent electric shock, short-circuit, or damage.
and wirelessly transfers this data from a transmitter to a receiver. Do not use this product for any
other purpose.
equipment, as this product's radio waves may affect the performance of these devices.
splatter, or locations that are humid or dusty. Failure to follow these instructions could result in fire,
electric shock or product failure.
operations or maintenance other than those described in this manual.
involved, such as medical equipment, atomic energy equipment and machinery, aviation and
aerospace, transportation, and control of other equipment. If this product is used for these
applications, we cannot be held responsible in the event of injury or property damage.
or electric shock.
result in fire or electric shock.
Failure to follow these instructions could result in fire or electric shock.
is involved. Failure to follow this instruction could result in fire, electric shock or falls.
this instruction could result in electric shock.
could result in fire or product failure.
prohibited and where its radio waves affect surrounding equipment.
product. Therefore, not every possible danger is indicated in this instruction manual. To prevent
accidents when operating or maintaining the product, in addition to the safety guidelines identified
in the instructions of this manual, follow all general safety guidelines.
product, immediately cut the power supplied to the product. Failure to follow this instruction could
result in fire or electric shock.
・ Disconnect the power before wiring, repairs, or replacing a fuse.
・Use this product under suitable conditions. If the body or unit becomes damaged, replace it.
WARNING
6
1. Before you begin