Wiring Method When Using Pole Bracket And Pole (Accessories) - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

7.1.1.4 Wiring Method When Using Pole Bracket and Pole (Accessories)

Wiring RS-232C Cable from Bottom of Main Unit
❶
Insert the pole ring into the pole bracket.
❷
Pass the RS-232C cable below the pole mount.
❸
Pass the RS-232C cable in from the pole marker
side, and pull out the cable from the pole bracket
side.
❹
Insert the pole into the pole bracket, lining up the
indentations.
❺
In two positions, use the tapping screws to
secure the pole bracket and pole.
Recommended Torque
1.4 N•m
❻
Thread the wire (gray or black) in the pole
bracket side, and pull out the wire from the pole
marker side.
When Not Using the RS-232C Cable
❶
Insert the pole ring into the pole bracket.
❷
Insert the pole into the pole bracket, lining up the
indentations.
❸
In two positions, use the tapping screws to
secure the pole bracket and pole.
Recommended Torque
1.4 N•m
❹
Thread the wire (gray or black) in the pole
bracket side.
❺
Pull out the wire (gray or black) from the pole
marker side.
❻
Pole Bracket
Pole ring
Pole
❸
Landmark
❻
Mounting Pole Base
* This illustration presents an overview of installation and
does not reflect the installation status at each step.
❹
Pole Bracket
Pole ring
Pole
Landmark
❺
* This illustration presents an overview of installation and
does not reflect the installation status at each step.
30
7. Operation
❺
Front Direction
Tapping screws
Tapping screws
❸
Pole Bracket
❶
Pole Ring Insertion
Direction
Slanting
Front
❹
Direction
Pole
❷
❷
Front
Tapping screws
Direction
Tapping
screws
Pole Bracket
❶
Pole Ring
Insertion Direction
Slanting
Front
Pole
❸
Direction
Bracket
Line up the
indented
sections
Pole
Pole
Bracket
Line up the
indented
sections