Function List; Led Unit And Buzzer Unit Control Functions; Contact Input Line Functions; Rs-232C Communication Functions - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

5.5 Function List

5.5.1 LED Unit and Buzzer Unit Control Functions

Runs control of LED and buzzer units connected to WDT-PRO. There are two types: Control based on the Signal
Tower control line, and remote control from the host.
Function
Signal Tower Control
Functions
Remote Control
Functions
Release Remote Control
Functions

5.5.2 Contact Input Line Functions

Determines the input status of the Signal Tower control line, external input line, and clear input line.
Function
Determine Signal Tower
Control Input Function
Determine External Input
Line Function
Determine Simultaneous
Input Function
Determine Clear Input
Line Function
Simple Counter Function

5.5.3 RS-232C Communication Functions

Runs communication with external equipment, such as a bar code reader, through the RS-232C interface.
Function
Communication Setup
Function
Receive Data Function
Transmit Data Function
Description
Functions that control LED or buzzer
units with the Signal Tower control line.
Functions that perform remote control
of LED or buzzer units from the host.
Function that enables operation
transition from Remote Control
Function to Signal Tower Control
Function.
Description
Function for determining the signal
input status of the Signal Tower control
line.
Function to detect changes in state of
8 external input lines and to save that
information.
Function to set the sensitivity for
determining simultaneous input on the
Signal Tower control line and external
input line.
Function to detect inputs on the clear
input line and to save that information.
Detects when the clear input line
changes from OFF to ON.
Function for saving the accumulated
value (counter value) of pulse inputs
(incremented 1 at a time) on a signal
wire.
Description
Function to set up RS-232C
communication.
Function for receiving data transmitted
by external equipment, following the
receive data file format settings.
Function for transmitting to external
equipment data received from the host.
☞ 8.1.1.Signal Tower Control Functions(P.45)
☞ 8.1.2 Remote Control Functions(P.46)
☞ 8.1.3 Release Remote Control Function(P.47)
☞ 8.2.1 Determine Signal Tower Control Input
Function(P.48)
☞ 8.2.2 Determine External Input Line
Function(P.50)
☞ 8.2.3 Function to Determine Simultaneous
Input of Signal Tower Control Line and
External Input Line(P.51)
☞ 8.2.4 Determine Clear Input Line
Function(P.51)
☞ 8.2.5 Simple Counter Function(P.52)
☞ 8.3.1 Communication Setup Function(P.53)
☞ 8.3.2 Receive Data Function(P.53)
☞ 8.3.3 Data Transmission Function(P.54)
16
5. Operation Overview
References
References
References