Checking Operations With Wdt-Pro Indicator - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

7.3.4 Checking Operations with WDT-PRO Indicator

Check this product's indicator on the WDT-PRO main unit.
●Indicator Light Status
Status
Green pulse*
Display Quality
of Wireless
Communication
Amber pulse*
Red pulse*
Red light on
Flashing blue
Light blue light on
Operation
Status
Flashing light blue*
Alternating
Red→Green→Red→Green
Flashing red
3
Error Status*
Flashing amber
Purple light on
* 1 Pulse is where the lamp fades between bright and dark repeatedly.
* 2 Flashes light blue only when the input information transmission timing is set to [On change]. ("8.4.2 Information
Transmission Function( P.55)")
* 3 When the indicator light shows an error status, refer to "9.1 Troubleshooting( P.58)".
Indicator Light
Indicates a good status. This status indicates the product can communicate
directly with the WDR without relying on other WDT.
1
(If the WDT and WDR are close together (within tens of centimeters), WDT
may display a red pulse. For an accurate display, use units with a separation
of about 1 m.)
Direct wireless connection with the WDR is not good, but the connection
1
with nearby WDT is good. If nearby WDT have a green pulse, that WDT is
used as a repeater for communication.
1
Connection is not good with any WDR or WDT in the WD wireless network.
Product is waiting to join the WD Network.
When the WDT-PRO receives a specific command from the host, flashes
blue for approximately 10 seconds.
When WDB-D80S receives data from external equipment via RS-232C
communication, indicator is light blue for about 2 seconds.
When WDT-PRO completes transmission of data received via RS-232C
2
communication to the host, indicator flashes light blue for about 2 seconds.
Operating in initialization mode.
WDB-D80S DIP switches set up incorrectly or error has occurred in WDT-
PRO.
Error has occurred in the connected base unit.
WDB-D80S DIP switches set up incorrectly.
WDT-PRO
Indicator
Status
42
7. Operation