Equipment Settings; Setup Information - Patlite WD PRO Series Instruction Manual

Wireless Data Communication System - WD PRO Series Instruction Manual

6.3 Equipment Settings

This section describes the steps for setting up and installing equipment. Refer to ☞ "7 Operation", as well as
instruction manuals of related products.

6.3.1 Setup Information

Have the information for the settings below prepared beforehand.
Information required
Information about the
equipment to connect
Information about the
Signal Tower
WDT-PRO and
WDR common setup
information
WDT-PRO setup
information
WDB-D80S setup
information
WDR setup information
* 1 For this product's settings, use [Power Supply Wire]. For information, refer to ☞ "WDS-WIN01 Instruction Manual".
* 2 For WDR setup information, refer to ☞ "WDT-5LR-Z2/WDT-6LR-Z2 Instruction Manual".
●Information about settings is required not only for installing equipment, but also when adding equipment, maintaining the
system, relocating, and for efficient and accurate work. Prepare the setup information before starting installation.
Description
Equipment name and other equipment identification
information
Model, operation information
ExtendedPanID Settings
Wireless Settings
Frequency Channel Settings
Format of Signal Tower Settings
Operation Settings
Input Information Transmission
Timing Setting
RS-232C Communication Settings
Simple Counter Settings
Determine Signal Tower Input
Setting
Power Supply Settings
Operation Settings
Determine Simultaneous Input
Sensitivity Setting
Input Information Transmission
Format Setting
Receive Data File
Format Setting
Wireless Settings Network Startup Method
IP Address
LAN Communication
Subnet Mask
Setting
Default Gateway
DNS Server Port Number
NOTICE
23
6. Installation
References
-
-
☞ 6.1.2 About Grouping and
ExtendedPanID(P.19)
☞ 6.1.1 What is the WD Wireless
Network?(P.18)
☞ 8.4.2 Information
Transmission Function(P.55)
☞ 8.3.1 Communication Setup
Function(P.53)
☞ 8.2.5 Simple Counter
Function(P.52)
☞ 8.2.1 Determine Signal
Tower Control Input
Function(P.48)
*1
☞ 8.2.3 Function to Determine
Simultaneous Input of Signal
Tower Control Line and
External Input Line(P.51)
☞ 8.4.2 Information
Transmission Function(P.55)
☞ 8.3.2 Receive Data
Function(P.53)
*2