Viewing T H E Trend Graph - Honeywell Touchpoint Plus Wireless Technical Handbook

3020M5001_Iss 1_07/18

6.10 Viewing t h e Trend Graph

Trend graph is drawn using one minute average reading so it is not suitable to view the short-term signal
fluctuations.
To view the graph:
1) Select the Menu>Information>Trend/Plot.
2) Select the required channel, and then select Data range.
3) The trend graph will be displayed.
Note: Touchpoint Plus does not adjust automatically for daylight savings time so Touchpoint Plus will retain a
backup of the earlier data if the clock is backdated (i.e. when ending daylight savings time).
Note: Touchpoint Plus will retain latest 8 hr data and will be cleared after power reset for trend graph
Operating Instructions
49
Touchpoint Plus Wireless
Technical Handbook