Due Authorisation; Approved Maintenance And Servicing Procedures - Honeywell Touchpoint Plus Wireless Technical Handbook

3020M5001_Iss 1_07/18
Safety Hazards, Warnings And Cautions
Approved conditions must satisfy the requirements of applicable national and international safety standards
and statutory requirements relating to electrical, EMC, and health hazards. In addition, they must satisfy the
requirements of the Site Safety Officer and the local safety regulations.

2.5.3 Due Authorisation

Before any production, maintenance, or servicing procedure is carried out; written authorisation must be
obtained from one of the following personnel to confirm that the proposed task satisfies the necessary safety
conditions:

A competent authorised person having a professional qualification in an appropriate technical discipline.

The Factory, Technical or Engineering Manager responsible for the working area.

The Site Safety Officer or an authorised Honeywell representative or approved distributor.

2.5.4 Approved Maintenance and Servicing Procedures

Approved Maintenance and Servicing Procedures are those stipulated in this manual or as authorised
separately by Honeywell.
It may be necessary to establish a temporary Locally Controlled Area (LCA) to restrict access during
maintenance, testing or service of this equipment.
12
Touchpoint Plus Wireless
Technical Handbook