Honeywell Touchpoint Plus Wireless Technical Handbook page 65

3020M5001_Iss 1_07/18
7.6.5 Configuring Wireless channels
Note: You need to complete Configuring relay channels
Note: You need to complete Network setting for wireless nodes
To configure a relay to mirror to wireless node relay
1) Login as an engineer or higher level
2) Select Menu>Configuration>Channel settings.
3) Select the required a Wireless Module
4) Select the 'Wireless Relay' as a type of device.
5) Select a RAEpoint and touch 'Select'.
6) Select a relay of the RAEpoint and link a relay of Relay Module.
To configure a Wind senor enable
Commissioning
59
Touchpoint Plus Wireless
Technical Handbook