Honeywell Touchpoint Plus Wireless Technical Handbook page 77

3020M5001_Iss 1_07/18 Touchpoint Plus Wireless
Technical Handbook
Maintenance
5) Insert the SD card containing the update file into the UI module.
6) Login as an administrator.
7) Select the Menu>Maintenance>Update system > Software.
8) Select a Module browse the appropriate firmware file in the SD card. Check the listed current and update
versions. And touch 'Update' to continue
9) When the updates are completed, the system will be rebooted automatically if reboot is required.
10) Remove the SD card and refit the event logging SD card.
11) Close the door and secure the access handle.
12) Check that the system status is OK and no faults, inhibits or errors are shown.
71