Figure 14. Fixing Orientation When Using The Optional Mounting Plate - Honeywell Touchpoint Plus Wireless Technical Handbook

3020M5001_Iss 1_07/18
System Mechanical Installation
Note:
You should ensure that washers between the TPPL enclosure and the wall or mounting plate are sufficiently
large to spread the load evenly.

For metal conduit, use a metal ground plate (i.e. PN: TPPLOMGND).

For external visual/audio outlet, ensure IP65 is maintained (i.e. PN: M-700123).

For cable gland, use type PG16 and tighten to 44.2 lb-in torque.

Figure 14. Fixing Orientation When Using the Optional Mounting Plate

22
Touchpoint Plus Wireless
Technical Handbook