Operation - H.C Duke & Son Arby's Electro Freeze Compact Series Operator's Manual With Replacement Parts List

9.1.2

Operation

1. In areas where state and local
health codes allow, leave the Selector
Switch in the "AUTO" position and the
syrup switch to the "OFF" position.
Note: The plunger rod and cover must be
in place for the unit to operate.
2. Clean all soiled surfaces with a
warm dish detergent solution.
3. Turn the mix feed regulator to the
"CLOSED" position as shown in figure
9-2.
Pin is in line with hole.
Look through top hole
in tube — you should
see clear through.
Figure 9-2
185260
Pin is not in line with hole.
DAY NIGHT
Look through top hole
in tube — you should
see the inner white
plastic tube (regulator)
blocking the opening.
Mix Feed Tube Positions
ELECTRO FREEZE Shake Model CS704
4. Check mix level in hopper to
ensure that there is enough mix to
keep the indicator light off, add mix if
necessary. Do not dispense product
when the mix feed regulator is in the
"CLOSED" position.
5. Before serving from the machine
use the wash bottle and spray the
plunger and mix chamber opening with
sanitizing solution and "OPEN" the mix
feed regulator and fill the hopper with mix
(figure 9-2).
27