H.C Duke & Son Arby's Electro Freeze Compact Series Operator's Manual With Replacement Parts List page 26

ELECTRO FREEZE Shake Model CS704
6.2 Disassembly Instructions
BLADE-SCRAPER
Figure 6-3 Beater Shaft Assembly
bushing (figure 6-2, 3) and beater shaft
(figure 6-3) from the cylinder. Then
remove the scraper blades (2) and
shaft seal (3,4) from the beater shaft
(1). Remove the cup seals (3) from the
washer (4) on the shaft seal assembly .
Remove the drip tray.
assembly from the hopper, as shown in
figure 6-4 and remove the o-rings (2).
hopper.
towel.
16
11. Remove the beater bearing
12. Remove the mix feed tube
13. Remove the float from the
14. Wipe off all lubricants with paper
— continued
SHAFT-BEATER
BLADE-SCRAPER
Tube-Mix Feed
O-Ring
Figure 6-4 Diassemble Mix Feed Tube
SEAL(CUP)-BEATER SHAFT
WASHER-DOUBLE SHAFT SEAL
SEAL(CUP)-BEATER SHAFT
O-Ring
Insert-Assy. Mix
Feed
185260