ELECTRO FREEZE Shake Model CS704
4.
Part Names and Functions
BLADE-SCRAPER
Figure 4-2 Beater Shaft Assembly
The following part names and descriptions
refer to figure 4-2.
1.) SHAFT - BEATER: Rotates in the
freezing cylinder, blending air and
mix and ejecting product.
2.) BLADE - SCRAPER: Scrapes the
frozen product from the freezing
cylinder wall.
3.) SEAL (CUP) - BEATER SHAFT:
Seals the opening between the
freezing cylinder and the beater. DO
NOT LUBRICATE.
4.) WASHER - SHAFT SEAL: Holds
the shaft seals together. Must be
lubricated.
8
SHAFT-BEATER
BLADE-SCRAPER
— continued
SEAL(CUP)-BEATER SHAFT
WASHER-DOUBLE SHAFT SEAL
SEAL(CUP)-BEATER SHAFT
185260