Flavor Selection Buttons; Indicator Light "Add Mix; Mix Float - H.C Duke & Son Arby's Electro Freeze Compact Series Operator's Manual With Replacement Parts List

ELECTRO FREEZE Shake Model CS704
5 Operator Controls
5.7 Rinse Switch
This momentary switch activates the rinse
water solenoid valve and the spinner motor
to rinse the mixing chamber between flavor
changes to eliminate flavor carryover.
5.8

Flavor Selection Buttons (8)

These push buttons are used to select the
flavor of shake to be dispensed. Press
the button for the desired flavor. Selection
of another button will cancel the previous
selection. 'Vanilla' provides product from
the cylinder only, with no added flavoring.
When 'Chocolate', Jamocha' , or 'Special'
are selected, that corresponding pump
will operate when product is dispensed.
5.9 Indicator- Light — "ADD MIX"
This light indicates the mix in the mix
hopper is at a low level and should be
refilled as soon as possible. Always
maintain at least 2 inches (5.1 cm) of mix
in the hopper. For best operating results
keep hopper full.
5.10 Mix Float (not shown)
When this float is mounted on the float
stem inside the hopper it automatically
senses the mix level. It activates the "Add
Mix" light
12
— continued
(7)
9
185260