H.C Duke & Son Arby's Electro Freeze Compact Series Operator's Manual With Replacement Parts List page 32

ELECTRO FREEZE Shake Model CS704
7 Assembly
o-ring (3) on the mix feed insert (2) and
lubricate. Then install the o-rings (4) on
the mix feed tube (1) lightly lubricate.
Place the insert inside the mix feed tube.
in the hopper pan. (Do not install in the
mix feed port in the hopper at this time.)
22
— continued
21. See Figure 7-6. Install the
22. Lay the mix feed tube assembly
Tube-Mix
Tube-Mix Feed
Feed
O-Ring
O-Ring
Figure 7-6
O-Ring
O-Ring
Insert - Assy.
Insert-Assy. Mix
Feed
Mix Feed
185260