Data Plate; Reference Information; Installation Date - H.C Duke & Son Arby's Electro Freeze Compact Series Operator's Manual With Replacement Parts List

ELECTRO FREEZE Shake Model CS704
3.2

Data Plate

Model:
Ser. No.
~ Volts:
Ph. Hz.
Cyl. Compressor
Beater Motor
Condenser Fan
Hopper Compressor
Cylinder Refrigerant:
Design Pressure:
Hopper Compressor
Min. Circuit Ampacity:
Max Fuse Size or HACR Cir. Breaker:
Figure 3-1
3.3

Reference Information

3.4

Installation Date

Fill in the date of installation, and the name, address, and phone number of the
installer in the space provided below. This information will be needed when ordering
parts or service for the CS704 freezer.
Date of installation:
4
Wire:
SINGLE UNIT
RLA LRA V
FLA HP V
FLA HP V
RLA LRA V
Amt:_____LB Type:_____
High:_____psig Low:_____psig
Refrigerant Amt:____ oz Type:____ Design Pressure High:_____psig Low:______psig
_____A
_____A
_____________________________________
Installed by: _____________________________________
Address: _____________________________________
_____________________________________
Phone: _____________________________________
The data plate provides important
information that the operator should
record and have available for parts
ASSEMBLED IN USA
ordering, warranty inquiries and service
requests.
Fill in the following information as soon as
you receive the Electro Freeze CS704.
(The item numbers — encircled, below —
correspond with the call-out numbers in
figure 4-1.)
1.) Model Number: _________________
2.) Serial Number:__________________
3.) Electrical Spec: Voltage ________
Phase _______
4.) Maximum Fuse Size: ____________
5.) Minimum Circuit Ampacity: _______
Hertz
_________
185260