Stroke Sensor (Optional), Intrinsically Safe - ProMinent Makro TZ Operating Instructions Manual

Identity code Phases, protection
specification
P2 3-phase, II2GEx‐
dIICT4
V2 3-phase, II2GEx‐
deIICT4
13.9

Stroke sensor (optional), intrinsically safe

Stroke sensor (optional), intrinsically safe
Namur sensor (Specified for EX zones)
Rated voltage Mains frequency
250-280 V / 60 Hz
440-480 V
400 V ±10% 50/60 Hz
Motor data sheets, special motors, special motor
flanges, external fan, temperature monitoring
For further information on the motor with identity
–
code specification "S", refer to our website
www.prominent.com. Motor data sheets can be
requested for all other motors.
With motors other than those with identity code
–
specifications "S", "M" or "N": Pay special attention
to the operating instructions for the motors.
Special motors or special motor flanges are avail‐
–
able on request.
Install the sensor according to the chapter "Installation,
electrical". Refer to its documentation.
Sensor name: NJ1.5-8GM-N.
5–25 V DC, in accordance with Namur or DIN 19234, potential-free
design.
Data
Rated voltage *
Power consumption - active surface
uncovered
Power consumption - active surface cov‐
ered
Rated switching distance
* Ri ~ 1 kΩ
Cable colour
blue
brown
Rated output
1.5 kW
2.2 kW
Polarity
-
+
Technical data
Remarks
with PTC, speed
control range 1:5
EX-variable speed
motor with inte‐
grated frequency
converter
Value Unit
8 VDC
> 3 mA
< 1 mA
1.5 mm
69