Declaration Of Incorporation - ProMinent Makro TZ Operating Instructions Manual

Declaration of Incorporation

21 Declaration of Incorporation
For pumps without explosion protection:
Tab. 13: Extract from the Declaration of Incorporation
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Only start up the pump when it has been established that the machine into which the pump has been installed corre‐
sponds to the provisions of the Machine Directive.
Date:
82
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
DE - 69123 Heidelberg,
n
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us. Technical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us will invalidate this dec‐
laration.
Metering pump without motor, product range Makro TZ
TZMb_ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0_ _ _
TZHa_ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0_ _ _
TZKa_ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0_ _ _
with characteristics
§ = "4" or "7" or "8" or "9" or "0"
see nameplate on the device
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
20.04.2016
You can download the Declaration of Incorporation at www.promi‐
nent.com.