Declaration Of Conformity For Machinery - ProMinent Makro TZ Operating Instructions Manual

19

Declaration of Conformity for Machinery

For pumps without explosion protection:
Tab. 11: Extract from the Declaration of Conformity
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Date:
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified in the following complies with the
relevant basic health and safety rules of the EC Directive, on the basis of
its functional concept and design and in the version marketed by us.
Any modification to the product not approved by us will invalidate this dec‐
laration.
Metering pump, Makro TZ product range
TZMb _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
TZHa _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
TZKa _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
with characteristics
§ = "R" or "S" or "V" or "Z" or "N"
see nameplate on the device
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EMC Directive (2014/30/EU)
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
EN 61000-6-2:2005 + AC:2005
EN 61000-6-4:2007 + AC:2011
20.04.2016
You can download the Declaration of Conformity at www.prominent.com.
Declaration of Conformity for Machinery
79