Safety Chapter - ProMinent Makro TZ Operating Instructions Manual

2

Safety chapter

Identification of safety notes
Warning signs denoting different types of
danger
Intended use
The following signal words are used in these operating instructions to
denote different severities of danger:
Signal word
WARNING
CAUTION
The following warning signs are used in these operating instructions to
denote different types of danger:
Warning signs
Only use the pump to meter liquid feed chemicals.
n
The pump is only approved for flammable feed chemicals if the oper‐
n
ator takes appropriate safety measures.
The pump may only be started up after it has been correctly installed
n
and started up in accordance with the technical data and specifica‐
tions contained in the operating instructions.
Observe the general limitations with regard to viscosity limits, chem‐
n
ical resistance and density - see also the ProMinent Resistance List
(in the Product Catalogue or at www.prominent.com)!
All other uses or modifications are prohibited.
n
The pump is not intended for the metering of gaseous media and
n
solids.
The pump is not intended for the metering of explosive substances
n
and explosive mixtures.
The pump is not intended for unprotected use outdoors.
n
The pump is only intended for industrial use.
n
Only allow trained and authorised personnel to operate the pump -
n
see the following table.
Other people may only access the pump if they have been informed
n
about the dangers.
You have a responsibility to adhere to the information contained in the
n
operating instructions at the different phases of the unit's service life.
Safety chapter
Meaning
Denotes a possibly dangerous sit‐
uation. If this is disregarded, you
are in a life-threatening situation
and this can result in serious inju‐
ries.
Denotes a possibly dangerous sit‐
uation. If this is disregarded, it
could result in slight or minor inju‐
ries or material damage.
Type of danger
Warning – hand injuries.
Warning – high-voltage.
Warning – hot surface.
Warning – danger zone.
7