Disposal - ProMinent Makro TZ Operating Instructions Manual

Decommissioning and disposal
Final decommissioning
Temporary decommissioning
12.2

Disposal

60
CAUTION!
Danger of damage to the device
The device may be damaged by incorrect and improper
storage and transport.
– Take into account the information in the "Storage,
transport and unpacking" chapter if the system is
decommissioned for a temporary period.
1. Disconnect the pump from the mains/power supply,
2. Depressurise and bleed the hydraulic system around the pump.
3. Flush the liquid end with a suitable medium - observe the material
safety data sheet! Flush the dosing head thoroughly when using
hazardous feed chemicals!
4. Drain the gear oil - refer to the chapter entitled "Maintenance".
5. Thoroughly clean the liquid end and the housing of chemicals and
dirt.
6. Possible additional work - refer to the "Storage, transport and
unpacking" chapter.
In addition:
1. Plug the caps on the valves.
2. Push the caps onto the hose nozzles.
3. Preferably place the pump on a pallet.
4. Cover the pump with a tarpaulin cover - allowing rear ventilation!
5. Store the pump in a dry, sealed place in line with the storage condi‐
tions outlined in the chapter entitled "Storage, Transport and
Unpacking".
CAUTION!
Environmental hazard due to gear oil
The pump contains gear oil, which can cause damage to
the environment.
– Drain the gear oil from the pump.
– Note the local guidelines currently applicable in your
country.
CAUTION!
Generally note the local guidelines currently applicable
in your country.