New Features In Comparison To Preceeding Versions - ABB UMC100-FBP Technical Description

Universal Motor Controller
UMC100-FBP
Technical Description

New features in comparison to preceeding versions

1SAJ520000R0100 -> 1SAJ520000R0101
New Protection Functions
The new voltage modules VI150 and VI155 can be connected. These modules add voltage and po-
wer based protection and supervision functions as well as energy measurement to the UMC100.
See section 4 -> Voltage and Power Protection Functions for details.
The UMC100 now supports the internal detection of an earth fault situation without using an exter-
nal summation current transformer.
New Motor Management Functions
The number of available TOn, TOff, RS and SR function blocks had been increased. See manual
2CDC 135 014 D02xx for more details.
The number of starts per time interval can be limited. A warning is signalled if just one start is left.
Other new Functions
The LCD panel supports up - and download of parameters or applications or both. See section 8
for details.
The LCD panel supports Russian as an additional language
The absolute motor current is available in the function block application and can be cyclically trans-
fered to the control system for example.
The status of the fieldbus communication is available in the function block application
The motor operation hours can be set
FieldBusPlug / Issue: 03.2012
The new UMC100 version is fully backwards compatible with the previous version
and replaces it.
To use the new features via fieldbus new fieldbus device description files have to be
used. Therefore updated GSD and EDS files are available on the ABB web site. See
section A1 for details.
- 7 - UMC100-FBP