Emc Umc100 And Dx1Xx / Vi15X Modules - ABB UMC100-FBP Technical Description

Universal Motor Controller
UMC100-FBP
Technical Description
Voltage Inputs L1, L2, L3
Overvoltage category
Nominal input range (line to line voltage)
Uimp
Voltage measuring in the nominal input range
Power factor: 0.4 ... 0.95
Real power kW
Energy kWh
THD
Rated Operational Voltage Ue
Usage in grounded/ungrounded networks
Voltage supply cables

EMC UMC100 and DX1xx / VI15x Modules

Measurement of radiated and conducted interfe-
rence according to EN61131-2 CISPR16-2-3
Electrostatic discharge accoring to IEC 61000-6-2
Radiofrequency electromagnetic field according to
IEC 61000-4-3
Fast transient bursts according to EN61000-4-4
High energy surges according to EN61000-4-5
Conducted radio frequency interference according
to EN61000-4-6
VI15x
Measurement of radiated and conducted interfe-
rence according to EN61131-2 CISPR16-2-3
Electrostatic discharge accoring to IEC 61000-6-2
Radiofrequency electromagnetic field according to
IEC 61000-4-3
Fast transient bursts according to EN61000-4-4
High energy surges according to EN61000-4-5
Conducted radio frequency interference according
to EN61000-4-6
Damped oscillatory wave acc. to
EN61000-4-18
Immunity low frequency harmonics acc. to
EN61000-4-11
FieldBusPlug / Issue: 03.2012
III in grounded networks
II in ungrounded networks
150 - 690 V AC
U =8 kV
imp
+/- 2 %
+/- 3.5 % for I > 0.75A
+/- 5 % typ.
+/- 5 % typ.
%
690 V AC line to line
VI155 can be used in grounded and ungrounded
networks
VI150 can only be used in grounded networks.
See installation instructions in section 2.
that the connection cables for voltage measure-
ment may require additional cable protection
Class A
8 kV air discharge
6 kV contact discharge
10 V/m
2 KV power supply
1/0,5 kV CM/DM
10 V
Class A
8 kV air discharge
6 kV contact discharge
10 V/m
2 kV power supply
1/0,5 kV CM/DM power supply
2/1 kV CM/DM L1/L2/L3 voltage inputs
10 V
Only voltage inputs L1/L2/L3:
2.5 kV / 1 kV CM / DM
Power supply: 50 ... 12 kHz, 3V
- 151 -
Note
UMC100-FBP