ABB UMC100-FBP Technical Description page 13

Universal Motor Controller
UMC100-FBP
V 6
Technical Description
DX111-FBP
The DX111-FBP expands the input and output channels of the UMC100.
It provides eight digital inputs for 24 V DC, four relay outputs and a current output to drive an analogue
instrument.
The following diagram shows the terminals and monitoring elements of the DX111-FBP module.
Connecting terminals
for the digital inputs.
Connecting terminals
for communication with
the UMC100
and further IO modules.
LEDs
green READY = operation
yellow DIAG
red
Terminals
for the
24 V DC supply
DX122-FBP
The DX122-FBP expands the input and output channels of the UMC-FBP.
It provides eight digital inputs 110 V AC - 230 V AC, four relay outputs and a current output to drive an
analog instrument.
The following figure shows the terminals and monitoring elements of the DX122-FBP module.
Connecting terminals
for the digital inputs.
Connecting terminals
for communication with
the UMC100
and further IO modules.
LEDs
green READY = operation
yellow DIAG
red
Terminals
for the
24 V DC supply
FieldBusPlug / Issue: 03.2012
= warning
ERROR = module fault
= warning
ERROR = module fault
1DO0 1DO1 1DOC 2DOC 2DO2 2DO3
1DI2 1DI3 1DI4 2DI7 AO+ AO-

DX111
1 C a 1 C b 2 C a 2 C b
Inputs D I 24V DC
READY
R ela y D O
Diag
230V AC / 1A
ERROR
1DI0 1DI1 1DIZ 2DIZ 2DI5 2DI6
0V 24V DC
1DO0 1DO1 1DOC
2DOC 2DO2 2DO3
1DI2 1DI3 1DI4 2DI7 AO+ AO-

DX122
1 C a 1 C b 2 C a 2 C b
Inputs D I 230V AC
READY
R ela y D O
Diag
230V AC / 1A
ERROR
1DI0 1DI 1 1DIZ 2DIZ 2DI5 2DI6
0V 24V DC
- 13 -
Connecting terminals
for the relay outputs
Connecting terminals for
the analogue output.
Front label,
e.g. for slave address
Connecting terminals
for the digital inputs
Connecting terminals
for the relay outputs
Connecting terminals for
the analogue output.
Front label,
e.g. for slave address
Connecting terminals
for the digital inputs
UMC100-FBP