Features - ABB Advant Controller 450 Product Manual

Advant Controller 450 Product Guide
Chapter 1 Overview

1.2 Features

1-2
Advant Controller 450 covers a wide range of functions such as:
• Logic and sequence control.
• Data and text handling.
• Arithmetic, reporting and positioning.
• Regulatory control including Fuzzy control, advanced PID and self-tuning adaptive
control.
• Highly extended flexibility and scalability - hardware as well as software.
• Fully modular with a controller subrack based on FB+ (IEEE 896) as the system bus.
• Self-configuration capabilities which make it possible to add units while the controller is
in full operation
• Support of a wide range of central and distributed I/O modules for maximum configuration
possibilities, with a maximum I/O capacity of 5700 I/O points.
• Support of local and central HMI for manual control operations, event and alarm handling,
trend curve presentation etc.
• Interoperability concerning all communication levels from plant floor fieldbuses to
high-speed plant network.
• Support of redundant Fieldbus Communication with Advant Fieldbus 100.
• Support of Advant Fieldbus 100 with cable length up to 13300 m (43300 feet).
3BSE 015 953R201 Rev B