ABB UMC100-FBP Technical Description page 101

Universal Motor Controller
UMC100-FBP
Technical Description
Motor Protection Parameters
Within this submenu all motor protection related parameters can be configured. The diagram below
shows the organisation of the different parameter masks in the menu tree.
2 Protection
Setting Ie 1
2.1
Setting Ie 2*
2.2
Trip class
2.3
Current factor
2.4
PTC
2.5
Cooling mode
2.6
Cooling time
2.7
Restart level %
2.8
2.9 Locked rotor (LR)
Thermal load warnlev
2.10
2.11
Phases
2.12 Over/under current
2.13 Int. earthfault
2.14 Voltage DIP**
2.15
Over/under voltage**
2.16 Voltage imbalance**
Load startup delay**
2.17
2.18
Over/under power**
2.19 Power factor**
2.20 Power quality**
*) Polechanging starter only
**) With voltage module only
FieldBusPlug / Issue: 03.2012
The parameters are described in detail in the section "Parameters and Data Structures
on a Fieldbus->Parameter Organisation-> Motor Protection Parameters".
2.9 Locked Rotor
2.11 Phases
2.12 Over / under current
2.13 Int. earthfault
2.14 Voltage DIP
LR trip level
2.9.1
LR trip delay
2.9.2
2.11.1 Phase loss protect.
2.11.2 Phase imb. trip lev.
2.11.3 Phase imb. warn lev.
2.11.4 Phase reversal
2.11.5 Check phase sequence
Low curr trip level
2.12.1
Low curr trip delay
2.12.2
Low curr warn level
2.12.3
Low curr warn delay
2.12.4
High curr trip level
2.12.5
High curr trip delay
2.12.6
High curr warn level
2.12.7
High curr warn delay
2.12.8
2.13.1 Earth flt. trip lev.
2.13.2 Earth flt. trip delay
2.13.3 Earth flt. warn lev.
2.13.4 Earth flt. warn delay
2.13.5 Earth fault detection
2.14.1 Enable voltage DIP
2.14.2 Voltage DIP duration
2.14.3 Autorestart enable
2.14.4 Autorestart window
2.14.5 Autorestart delay
2.14.6 DIP restart level
2.14.7 DIP level
- 101 -
2.15 Over / under voltage
U low trip level
2.15.1
U low trip delay
2.15.2
U low warn level
2.15.3
U low warn delay
2.15.4
U high trip level
2.15.5
U high trip delay
2.15.6
U high warn level
2.15.7
U high warn delay
2.15.8
2.16 Voltage imbalance
U imb trip level
2.16.1
U imb trip delay
2.16.2
U imb warn level
2.16.3
U imb warn delay
2.16.4
2.18 Over / under power
P low trip level
2.18.1
P low trip delay
2.18.2
P low warn level
2.18.3
P low warn delay
2.18.4
P high trip level
2.18.5
P high trip delay
2.18.6
P high warn level
2.18.7
P high warn delay
2.18.8
2.19 Power factor
PwrFactor trip level
2.19.1
PwrFactor trip delay
2.19.2
PwrFactor warn level
2.19.3
PwrFactor warn delay
2.19.4
2.20 Power quality
THD warn level
2.20.1
THD warn delay
2.20.2
UMC100-FBP