Adjusting Parameters - ABB UMC100-FBP Technical Description

Universal Motor Controller
UMC100-FBP
Technical Description

Adjusting Parameters

Adjusting a Numerical Value
This type of dialog allows a numerical value to be specified within the given limits. The single digits must
be defined from right to left. If the last digit was reached the right hot key changes from 'Next' to 'Save'.
When pressing 'Save' the specified value is stored in the UMC. The mask can be exited at any time with
the Cancel button (left hot key). In this case the changes are discarded.
The following example shows how to set the nominal motor current I
To change the digit use the up/down keys. As it is not possible to enter a value outside the given limits
start editing the first digit by pressing the up button. If you reach 10, a 0 is displayed in the first digit and a
1 in the second digit. Press the left hot key now to go to the next digit.
Änderung
abbrechen /
Cancel edit
Selecting an Option from a List
This type of dialog allows an item to be selected from a given list of options. With the up/down keys
you can scroll through the list. The slider on the right shows the current position within the list. Pressing
'Select' chooses the currently marked item (inverted). Pressing 'Cancel' exits the dialog and discards the
selection.
Ausgewählte
Option /
Selected
option
UMC100-FBP
e1
Letzte Stelle verändern /
Last digit modified
Min/max Wert /
Min/max Value
Nächste Stelle /
Next Position
Wert erhöhen /
Increase value
Wert verkleinern /
Decrease value
Der Slider zeigt die aktuelle Pos.
innerhalb der Auswahl an /
Slider indicates position within the
given options
Auswahl übernehmen /
Select option
Vorherige Option aus der Liste /
Previous Option in the list
Nächste Option aus der Liste /
Next option in list
Editieren abbrechen /
Cancel editing
- 104 -
.
Änderungen
Sichern /
Save changes
FieldBusPlug / Issue: 03.2012