ABB UMC100-FBP Technical Description page 78

Universal Motor Controller
UMC100-FBP
Technical Description
Monitoring Data for Reversing Starter
Word Byte
0
0
1
1 2, 3
2 4, 5
3 6, 7
4 8, 9
5 10.11
12
6
13
14
7
15
Command Data for Reversing Starter
Word Byte
0
0
1
2
1
3
2 4, 5
3 6, 7
1)
Controlled by the UMC100 if configured as fault output.
UMC100-FBP
Bit 7 Bit 6 Bit 5
Summary Summary Local
Warning Fault Control
UMC100 UMC100 UMC100
DI5 DI4 DI3
Remaining data see section Parameters and Data Structures on a Fieldbus
The table above represents the data allocation as realised with the built-in standard applica-
tions. It may differ for customer-specific applications!
Bit 7 Bit 6 Bit 5
- Fault Auto
Reset Mode
UMC100 - -
DO2 1)
Remaining data see section Parameters and Data Structures on a Fieldbus
The table above represents the data allocation as realised with the built-in standard applica-
tions. It may differ for customer-specific applications!
Bit 4 Bit 3
Reverse Overload
Lockout warning
Time
UMC100 UMC100
DI2 DI1
Bit 4 Bit 3 Bit 2
Prepare - Run
Emergency Forward
Start
UMC100 - -
24VDC
1)
Out
- 78 -
Bit 2 Bit1 Bit 0
Run Off Run
Forward Reverse
UMC100 - -
DI0
Bit1 Bit 0
Off Run Reverse
- -
FieldBusPlug / Issue: 03.2012