ABB UMC100-FBP Technical Description page 103

Universal Motor Controller
UMC100-FBP
Technical Description
Maintenance and Service Parameters/Actions
Within this submenu all maintenance and service related parameters / actions can be configured. The
figure below shows the organisation of the different parameter masks in the menu tree.
Menu point 6.3.1 shows the list of errors and their occurrence in seconds since the start-up of the UMC.
After a power cycle the history buffer is cleared. Use the up/down keys to scroll within the list.
Menu point 6.3.2 shows present warnings. The "i" in the icon bar on the top level masks indicates the
presence of warnings. Use the up/down keys to scroll within the list.
Menu point 6.5 lists all changed parameters. This is useful if you want to verify the parameterization was
carried out correctly or when calling a technical specialist who wants to know what has been configured.
Menu point 6.4 allows to transfer the parameters and/or the application to the LCD panel and back.
6 Maintenance / service
6.1 Maintenance counters
6.2 Service tasks
6.3 Diagnosis
6.4 Parameter transfer
6.5 Changed parameters
6.6 UMC100 SW version
FieldBusPlug / Issue: 03.2012
6.1 Maintenance counters
Motor operation hours
6.1.1
Number of starts
6.1.2
Number of trips
6.1.3
Remaining starts
6.1.4
6.2 Service Tasks
Set operation hours
6.2.1
Reset oper. hours
6.2.2
Reset num. of starts
6.2.3
Reset num. of trips
6.2.4
Reset parameters
6.2.5
Reset energy
6.2.6
6.3 Diagnosis
Error history
6.3.1
Present warnings
6.3.2
- 103 -
6.4 Parameter transfer
6.4.1 Upload to LCD panel
6.4.2 Download to UMC
6.4.1 Upload to LCD panel
6.4.1.1
Only parameter
6.4.1.2
Only application
6.4.1.3
Par and application
6.4.2 Download to UMC
6.4.2.1
Only parameter
6.4.2.2
Only application
6.4.2.3
Par and application
UMC100-FBP