Configuration; Step 1, Start The Wizard; Step 2, System Parameters; Figure 7-1 Link Configuration - Radwin WinLink 1000 Series User Manual

Configuration

Configuration
Since configuration functionality is included in the installation, we will briefly
review the main steps and for most part offer references to the correspond-
ing installation step.

Step 1, Start the Wizard

In the tool bar of the RADWIN Manager main window, click the Link Con-
figuration button. The Link Configuration button is only accessible on a
fully installed link as set out in 5.
The Configuration Wizard opens:
Figure 7-1: Link Configuration Wizard
Click Next to proceed with the configuration procedure.

Step 2, System Parameters

The System dialog box opens:
WinLink™ 1000 User Manual Release 1.9
Chapter 7
7-3