Tdm Loopbacks; Table 9-2 Link Compatibility - Radwin WinLink 1000 Series User Manual

TDM Loopbacks

sages (can be viewed in the Events Log) indicate the problems or limitations
and suggest upgrades when appropriate.
The following Link Status messages are given:
fullCompatibility
compatible. The message indicates that an upgrade is available.
restrictedCompatibility
operate correctly. However, new features are not supported.
softwareUpgradeRequired
ing limited operation. The message is, that a software upgrade is required.
versionsIncompatibility
incompatible. You need to perform local upgrades.
Table 9-2: Link Compatibility Trap Messages
Link State
fullCompatibility
restrictedCompatibility
softwareUpgradeRequired
versionsIncompatibility
TDM Loopbacks
Internal and external loopbacks on both sites of a link are used to
test the TDM connections
To activate a loopback:
1. From the Maintenance menu, choose Loopbacks... or right-click
the TDM display in the main window.
The Loopbacks dialog box appears:
WinLink™ 1000 User Manual
- different software versions were detected that are fully
- different software versions were detected that
- different software versions were detected allow-
- different software versions were detected that are
Link State Link Status
text Color
Active Green
Active -
Magenta
Software (Same as
Version authenticatio
mismatch n error)
Active –
Software Brown
Upgrade (Major)
Required
Not Active -
Software
Red
Upgrade
Required
Release 1.9
Chapter 9
Site Description
Software Upgrade
Available
Software Upgrade
Recommended
Software Upgrade
Required
Local Software
Upgrade Required
9-3