Changing Band For Dfs; Figure E-6 Mainw - Radwin WinLink 1000 Series User Manual

Changing Band for DFS

Figure E-6: Main Window after band change - new band circled
If you carry out this operation on a link, the band is effective on both sites
and you are placed in installation mode.
Note
Changing Band for DFS
Changing to a DFS band is similar to the foregoing procedure.
As soon as you establish a link using a DFS band, you are offered Configura-
tion only in the main menu. Installation mode is disabled.
10.
WinLink™ 1000 User Manual Release 1.9
Appendix E
E-5