Figure 5-3 Change Linkp; Figure 5-4 Lost Or Forgotten - Radwin WinLink 1000 Series User Manual

Installation
The Channel Setting dialog box appears. Proceed to
below.
Changing the Link Password
The default password is
link password as explained here.
To change the link password:
1. Click the Change button in the System dialog box.
The Change Link Password dialog box opens.
Use the Hide characters check box for maximum security
Note
Figure 5-3: Change Link Password dialog box
2. Enter the current link password (The default link password for a new
ODU is
If you have forgotten the Link Password, click the Forgotten Link Pass-
word button. The following window is displayed:
Figure 5-4: Lost or forgotten Link Password recovery
WinLink™ 1000 User Manual
wireless-bridge
wireless-bridge
).
Release 1.9
Chapter 5
Channel Settings,
. Optionally, you can change the
5-5