Why This Is Needed; Required Equipment; The Procedure - Radwin WinLink 1000 Series User Manual

Changing the Factory

Why this is Needed

All ODUs supplied by RADWIN come with pre-configured with a factory
default product-dependent band according to the ODU part number.
For ODUs supporting Multi-band, it may be changed using the procedure in
this appendix. The procedure is generic, applying to all ODUs with the Multi-
band feature.
•
•
Caution

Required Equipment

The minimal equipment required to change an ODU default band is:
•
•
•
•
•

The procedure

The following procedure is generic to all relevant RADWIN radio products.
What you see on your running RADWIN Manager may differ in some details
from the screen captures used to illustrate this Appendix.
Note
WinLink™ 1000 User Manual
If for some reason the default band needs to be changed, it should
be done before link installation.
Use of an incorrect band may be in violation of local regulations.
Laptop computer (managing computer) satisfying the requirements
of Table 4-1.
An installed copy of the RADWIN Manager
A PoE device
A crossed Ethernet LAN cable
An IDU-ODU cable
Release 1.9
Default Band
Appendix E
E-1