Viewing System Details; Viewing Air Interface Details; Figure 8-2 Air Interface Details - Radwin WinLink 1000 Series User Manual

Broadband wireless transmission
Table of Contents

Advertisement

Viewing System Details

To edit the Configuration Parameters:
1. Click the required site button on the main tool bar of the RADWIN Man-
ager
OR
Click Configuration from the main menu and choose a site to config-
ure.
The Configuration dialog box opens (see
2. Choose the appropriate item in the left hand list to open a dialog box.
3. Click Apply to save changes.
In subsequent instructions, we will simply say "Choose a site to configure"
on the understanding that the foregoing procedure is implied.
Viewing System Details
This is the first window displayed - as depicted above. You can edit the con-
tact details and site names.

Viewing Air Interface Details

Click the Air Interface item in the left hand list. A window similar to the fol-
lowing appears:
Figure 8-2: Air interface details
The only thing you may change here is the expected Tx power. If for exam-
ple you reduce it to 22, you are first offered a notification window like this:
WinLink™ 1000 User Manual
Figure 8-1
Release 1.9
Chapter 8
above).
8-3

Advertisement

Table of Contents
loading

Related Products for Radwin WinLink 1000 Series

This manual is also suitable for:

Winlink 1000Winlink 1000 accessWinlink 1000 vsWinlink 1000 high end

Table of Contents