Odu/Hss Unit Connection Pinout; Radio Frame Pattern Table - Radwin WinLink 1000 Series User Manual

ODU/HSS Unit Connection Pinout

4. Tighten the protective seal that is on the prepared cable over the RJ-45
connector.
5. Repeat for all ODUs that are to be collocated at the hub site. The next
ODU to be connected is inserted to SYNC 2, followed by SYNC 3 and so
on.
In the event of an HSS installation fault, the ODU will sound a beep pattern
according to the following chart, which may also be seen on the ODU
product label:
Note
ODU/HSS Unit Connection Pinout

Radio Frame Pattern Table

Under HSS, the TDD mechanism of the collocated radios transmits at the
same time and receives at the same time. The cycle duration of transmit
and receive is called
always 1250 milliseconds.
WinLink™ 1000 User Manual
Table H-1: ODU/HSS Unit Connection Pinout
Color ODU RJ-45
White/Green 1
Green 2
White/Orange 3
Orange 6
Blue 4
White/Blue 5
White/Brown 7
Brown 8
Radio Frame Pattern
Release 1.9
HSS UNIT
RJ-45
1
2
3
6
4
5
7
8
(RFP) and with RADWIN 2000 it is
Appendix H
H-4