Antenna Characteristics - Radwin WinLink 1000 Series User Manual

Antenna Characteristics

Antenna Characteristics
An antenna is the radiating and receiving element from which the radio sig-
nal, in the form of RF power, is radiated to its surroundings and vice versa.
The transmission range is a function of the antenna gain and transmitting
power. These factors are limited by country regulations.
The WinLink™ 1000 may be operated with an integrated antenna attached
to the ODU unit, or with an external antenna wired to the ODU via an N-
type connector. All cables and connections must be connected correctly to
reduce losses. The required antenna impedance is 50Ω.
Frequency bands
Frequency
2.4 2.5
range
GHz GHz
2.40-2.70 GHz √
2.30-2.70 GHz √ √
2.400-2.483 GHz √
2.50-2.70 GHz √
4.90-5.10 GHz
4.90-5.00 GHz
4.94-6.00 GHz
4.90-5.35 GHz
5.150-5.350 GHz
5.470-5725 GHz
5.15-6.00 GHz
5.15-5.85 GHz
5.725-5.850 GHz
5.150-5.875 GHz
WinLink™ 1000 User Manual
4.9 5.3 5.4 5.8
GHz GHz GHz GHz
√
√
√
√ √ √
√
√
√
√ √ √
√
√
√ √ √
Release 1.9
Form
Type
5.9
factor
GHz
Integrated Flat panel
Integrated Flat panel
Grid
External
Omni
External Grid
External Flat panel
External Dish
Integrated Flat panel
√
External Flat panel
External Dish
External Dish
√ External Flat panel
External Flat panel
External Dish
External Flat panel
Appendix N
Beam Dimen-
Gain
width sions
16dBi 20° 1ft
17.5dBi 25° 1ft
E:14°
24dBi 2ft / 3ft
H:10°
E:25°
6dBi 1.2ft
H:360°
E:13°
24dBi 2ft / 3ft
H:9°
27dBi 5° 2ft
27dBi 8° 2ft
18.5dBi
10° 1ft
22dBi
21dBi 9° 1ft
31dBi 5° 3ft
31.5dBi 4° 3ft
22dBi 9° 1ft
28dBi 4.5° 2ft
E:32°
0.4ft /
9.5dBi
0.3ft
H:73°
32.5dBi 3ft
6°
29dBi 2ft
18dBi 18° 0.6ft
N-5