Appendix I Brs Installation Procedure; Figure I-1 Inactive Link State - Radwin WinLink 1000 Series User Manual

BRS Link Activation
In accordance with 2.5 GHz standard, WinLink™ 1000-BRS links must be
activated before use. This is done at both ODUs independently before
installation on site. Both ODUs must be configured the same.
To Activate a BRS Link:
1. Install RADWIN Manager software as usual.
2. When the Manager Main Screen is displayed it appears with the Link Sta-
tus label red and showing Inactive. The Link Configuration and Link
installation buttons are disabled.
Figure I-1: Inactive link state
3. Click Configuration>Configure Location
The Air Interface dialog box opens:
WinLink™ 1000 User Manual
BRS Installation
Procedure
Release 1.9
Appendix I
I-1